Electrolux U31180 EFC 9670-6670 User Manual

Page 23

Advertising

electrolux

electrolux installation 23

Installation

Make sur

Make sure that the cooker hood is disconnected fr

e that the cooker hood is disconnected fr

e that the cooker hood is disconnected from the power supply befor

om the power supply befor

om the power supply before

carrying out the installation.

Remove the perimeter air suction panels (EFC 9673 only) and the grease filters.
• Mark a central line on the wall to facilitate the installation procedure (1

1). Position

the drilling template so that the median line printed on it corresponds to the
central line marked previously, and so that the lower side of the template
corresponds to the lower part of the cooker hood once it has been fitted (2

2).

• Make 3 holes with Ø 8 mm (2 on top and 1 underneath) and fit 3 rawl plugs into

them (3

3).

• Fix the motor assembly support bracket in place using 2 screws (4

4).

• Make two holes with Ø 8 mm near the ceiling and use them to fix the support

bracket of flue G

G in place (use the bracket as a template – rest it against the wall

which joins onto the ceiling). Insert 2 rawl plugs into the holes (5

5) (install deflector

F underneath the bracket using 4 screws if you wish to use the cooker hood as
a filter version) and fix the bracket in place using 2 screws (6

6).

• Fit the cooker hood (7

7) and adjust its position (8-9

8-9

8-9).

• Fix the cooker hood in place (10

10).

• Install the exhaust tube (11

11) leading from cooker hood exhaust outlet B

B to the

outside environment (ducted version) or deflector F

F (filter version).

• Perform all necessary electrical connections (12

12).

Advertising

This manual is related to the following products:

U31180 EFC 9673

Popular Brands

Popular manuals