Fig.3, Fig.4 – Sealey SA56 User Manual
Page 3
5.3. If the air line does not have a lubricator, lubricate the tool daily with a few drops of
Sealey air tool oil dripped into the air inlet.
5.4.
Clean the tool after use with a dry cloth.
5.5.
Loss of power or erratic action may be due to the following:
a) Excessive drain on the air line. Moisture or restriction in the air pipe. Incorrect size
or type of hose connector. To remedy, check the air supply and follow the instructions in
section 3.
b) Grit or gum deposits in the tool may also reduce performance. Flush the tool out
with gum solvent oil or an equal mixture of SAE No 10 oil and paraffin. Allow to dry
before use.
5.6.
For a full service contact your local Sealey service agent.
5.7.
When not in use, disconnect from air supply, clean tool and store in a safe, dry,
childproof location.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
SA56 Issue: 1 - 10/05/13
Environmental Protection.
Recycle unwanted materials instead of disposing of them as waste.
All tools, accessories and packaging should be sorted, taken to a recycle
centre and disposed of in a manner which is compatible with the
environment.
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.
© Jack Sealey Limited 2013
Spacer
Central blade spacer
fig.3
Cutter housing
fig.4
Smear silicone grease
on outer race.
Inside face
Inside face