Emerson Process Management Bristol Series 9110-00A - Manual (Page 3)

Product Data Document
118DS-16b
July 24, 2007 - Page 3
Bristol ® Series 9110-00A
Remote Set Regulator
Remote Automation Solutions
Website: www.EmersonProcess.com/Remote
Supply Specifications
Electrical
Models Requiring 12 volts: 11 to 14 Vdc, 0.35 A
max.
Models Requiring 24 Volts: 22 to 28 Vdc, 0.25
A max.
Fusing: One 1 A, 250 V 3 AG normal blow chip
mounted on terminal board
Power Failure: In the event that the supply
voltage drops below rated value or goes to zero,
mechanical memory will retain the last given
setting.
Pneumatic Supply
Models with 3 – 15 PSI range: 20 PSI min., 100
PSI max.
Models with 3 – 27 PSI range: 30 PSI min., 100
PSI max.
Models with 6 – 30 PSI range: 35 PSI min., 100
PSI max.
•
•
•
•
•
•
•
Physical Specifications
General
Actuator Case:
Weatherproof, explosion proof
Cast aluminum housing with
gasketed screw-on cover
Light gray epoxy finish
Overall Dimensions
Actuator Case:
6” (152.4 mm) dia. By 7-1/8” (181 mm) long
Model 9110 complete:
10” (254 mm) long by 6” (152.4 mm) dia.
Mounting
Model 9110 complete: Line or 2” dia. Pipe
mount
Weight
Approx. 12 lbs.
•
•
•
•