Sealey AK3982 User Manual
Compact riveter, Model no . ak3982, Instructions for
InstructIons for:
COMPACT RIVETER
Heavy Duty with collection Bowl
MoDEL no
. AK3982
thank you for purchasing a sealey riveter. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
1. SAFETY INSTRUCTIONS
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND
CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY
CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
2. INTRODUCTION
WARNING! Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this equipment.
familiarise yourself with the application and limitations of the riveter, as well as the potential hazards.
Maintain the
riveter in good condition.
replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
Keep the work area clean, uncluttered and ensure that there is adequate lighting.
Keep the riveter clean for best and safest performance.
WARNING! Always wear approved eye or face protection when operating the riveter.
Keep children and unauthorised persons away from the work area.
check moving parts alignment on a regular basis.
DO NOT hold the workpiece by hand. secure workpiece with a clamp, vice or other adequate holding device.
DO NOT use the riveter for any purpose other than that for which it is designed.
DO NOT operate the riveter if any parts are damaged or missing, as this may cause failure and/or personal injury.
When not in use store in a safe, dry, childproof area.
●
Aluminium body and high grade alloy steel jaws, with double handle bearings, provide effortless functionality.
●
Suitable for aluminium, steel and stainless steel rivets.
●
Includes Chrome Molybdenum special profile nozzle for structural rivets up to 6.4mm.
●
Model No. AK3982
3. OPERATION
3.1
choose the correct nosepiece for the size of rivet (the nominal diameter of the rivet is that of the head, not the stem).
3.2
screw the nosepiece into the head of the riveter, tighten with wrench.
3.3
With the riveter handles open, fully insert the rivet stem into the nosepiece.
3.4
Place rivet in hole in the workpiece and squeeze the riveter handles closed to deform the rivet.
3.5
If the rivet stem does not shear, open the handles and close together again.
3.6
When the stem shears, open the handles. The stem from the riveter will drop into the container. When the container is 2/3 full
remove it and empty the used stems.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park
,
Bury st. Edmunds, suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
AK3982 Issue: 1 - 22/10/12
4. MAINTENANCE
4.1
Keep all pivots oiled lightly.
4.2
The jaw case assembly (see fig.2) should be disassembled, cleaned and oiled at regular intervals, depending on the frequency of
use. the need for cleaning/jaw replacement will be indicated by the riveter failing to grip the rivet shaft.
Fig.1
Fig.2
© Jack sealey Ltd