Sealey BS101 User Manual
Vortex cleaning gun - upholstery/body, Instructions for, Model no: bs101
Designed for the car dealer and professional valeter, this essential tool cleans hard to reach areas such as seat runners, door trims, dash boards,
upholstery and bodywork. Tornado action lifts dirt out of upholstery, saving time and money.
3.1 Add desired cleaning medium to reservoir by removing cap, (see fig.1).
3.2 Adjust fluid control valve, (see fig.1) close (turn clockwise) to maximise fluid flow and open (turn anticlockwise) to decrease fluid flow.
WARNING ! Use the correct detergent from our Sealey VMR range, contact your nearest Sealey dealer for supplies. Do not (under any
circumstances) use domestic detergent or any other general purpose carpet cleaner, car wash or upholstery detergent.
3.3 The gun can be used vertically to clean headlinings etc.
3.4 Ensure the gun is emptied and rinsed out before storing it in a safe, childproof location.
inSTRUcTionS foR:
VORTEX CLEANING GUN -
UPHOLSTERY/BODY
MoDEl no: BS101
1. SAfETY INSTRUCTIONS
2. INTRODUCTION & SPECIfICATION
3. OPERATION
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years
of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREfULLY. NOTE THE SAfE OPERATIONAL REQUIREMENTS, WARNINGS, AND
CAUTIONS. USE THIS PRODUCT CORRECTLY, AND WITH CARE fOR THE PURPOSE fOR WHICH IT IS INTENDED. fAILURE TO DO SO
MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INfORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
iP32 7AR
www.sealey.co.uk
W e b
Original Language Version
BS101 issue:1 - 26/03/12
WARNING! Ensure that Health and Safety, local authority and general workshop practice regulations are adhered to when using tools.
DO NOT use tools if damaged.
DO NOT use the gun to perform a task for which it is not designed.
DO NOT allow untrained persons to use the gun.
DO NOT use when tired or under the influence of drugs, alcohol or intoxicating medication.
Maintain tools in a good and clean condition for the best and safest performance.
Wear approved eye protection. A full range of personal safety equipment is available from your Sealey dealer.
Wear suitable clothing to avoid snagging. Do not wear jewellery and tie back long hair.
Keep children and unauthorised persons away from the work area.
Keep work area clean and tidy and free from unrelated materials.
Ensure the work area has adequate lighting.
Account for all tools being used and do not leave them on or in the vehicle.
WARNING! DO NOT pollute the environment by allowing uncontrolled discharge of fluids. Dispose of waste liquids in accordance with local
authority regulations.
Model No: . . . . . . . . . . . . . . . BS101
Air Pressure: . . . . . . . . . . . . . 101-116psi (7-8bar)
Air Consumption . . . . . . . . . . . 6.35cfm
Air Inlet Size. . . . . . . . . . . . . . 1/4"BSP
fig.1
© Jack Sealey limited
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to: www.sealey.co.uk
email: [email protected] or phone: 01284 757500