Fig. 1, Operation – Sealey PC40 User Manual
Page 2
3. OPERATION
fig. 1
3.1.
ADJUSTING PC40.V2 TO CUT SMALLER PIPE
SIZES UNDER 26MM
3.1.1 The PC40 has a switch on its top surface which
adjusts the starting position of the blade to more
conveniently cut pipe sizes of 26mm or less.
3.1.2 To select the 26mm position first retract the blade by
pressing the retraction button (See fig.1-R).
3.1.3 Now squeeze the handle/trigger fully six times, then
move the switch to the 26mm position. The blade will
only now retract sufficiently to allow a 26mm tube to
be inserted.
3.1.4 To return to the 42mm position first press the
retraction button which will partially retract the blade.
3.1.5 Now squeeze the handle/trigger fully three times,
then move the switch to the 42mm position. The
blade will now fully retract when the retraction button
is pressed.
PC40.V2 - 1 - 051005
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice. IMPORTANT: No liability is accepted for incorrect use of this equipment. WARRANTY: Guarantee is 12
months from purchase date, proof of which will be required for any claim. INFORMATION: For a copy of our latest catalogue and
promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
E-mail:
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
Web address: www.sealey.co.uk
3. OPERATION
fig. 1
3.1.
ADJUSTING PC40.V2 TO CUT SMALLER PIPE
SIZES UNDER 26MM
3.1.1 The PC40 has a switch on its top surface which
adjusts the starting position of the blade to more
conveniently cut pipe sizes of 26mm or less.
3.1.2 To select the 26mm position first retract the blade by
pressing the retraction button (See fig.1-R).
3.1.3 Now squeeze the handle/trigger fully six times, then
move the switch to the 26mm position. The blade will
only now retract sufficiently to allow a 26mm tube to
be inserted.
3.1.4 To return to the 42mm position first press the
retraction button which will partially retract the blade.
3.1.5 Now squeeze the handle/trigger fully three times,
then move the switch to the 42mm position. The
blade will now fully retract when the retraction button
is pressed.
PC40.V2 - 1 - 051005
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice. IMPORTANT: No liability is accepted for incorrect use of this equipment. WARRANTY: Guarantee is 12
months from purchase date, proof of which will be required for any claim. INFORMATION: For a copy of our latest catalogue and
promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
E-mail:
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
Web address: www.sealey.co.uk