Sealey SCR84 User Manual
Scr84
1.1
GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this creeper.
Locate creeper in a suitable working area.
WARNING! Use creeper on level and solid ground, preferably concrete.
Keep the creeper clean and tidy in accordance with good workshop practice.
DO NOT use the creeper
for any purpose other than that for which it is designed.
DO NOT stand on the creeper.
DO NOT get the creeper wet or use in damp or wet locations or areas where there is condensation.
DO NOT clean the creeper with any solvents which may damage the paint surface or padded areas.
Heavy steel framework with powder coat paint finish. Easy rolling Ø75mm swivel composite castors. Vinyl covered back and headrest.
Suitable for the professional workshop.
Model No: . . . . . . . . . . . . . . . . . . . . . . SCR84
Material: . . . . . . . . . . . . . . . . . . . . . . . . Steel
Size: (L x W x H): . . . . . . . . . . . . . . . . . 1135 x 510 x 185mm
Wheels:. . . . . . . . . . . . . . . . . . . . . . . . . 6
4.1.
Screw on headrest using four cross head screws from underneath.
4.2. Fit six castors using hex tube nuts.
INSTRUCTIONS FOR:
CREEPER WITH STEEL FRAME, 6 WHEELS
& HEADREST DELUXE 44"
MODEL NO:
SCR84
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
1. SAFETY
2. INTRODUCTION
3. SPECIFICATION
4. ASSEMBLY
SCR84 Issue: 1 - 18/08/14
Original Language Version
© Jack Sealey Limited
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk