Sealey TB042 - Manual

TB042 - 1 - 260802
01284 757500
E-mail: [email protected]
Web: www.sealey.co.uk
01284 703534
Sole UK Distributor,
Sealey Group, Bury St. Edmunds, Suffolk.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address,
including postcode.
Instructions for:
BALL & PIN TOW HITCH
Model:
TB042
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY
AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
p p WARNING! Before using the tow hitch, read, understand and apply the following:
l DO NOT exceed the specified towed and towing vehicle weights.
l Not for use on cars or car-derived vans first registered on or after 1st August 1998.
l Using ball hitch
l Using pin hitch
Maximum weight of towed vehicle 1500kg. Maximum weight of towed vehicle 3000kg.
Maximum weight of towing vehicle 3050kg.
l Never use without the towing pin and the security pin in place.
l Before each use, lightly grease the ball head and check the hitch for damage. If damage is found, rectify
before using the hitch.
l The ball hitch is designed for normal road use. If used off-road, where the angular movement between towing
and towed vehicles may be great, there is a risk of the female (socket) hitch fouling the neck of the ball and
causing damage. Therefore, for off-road use, it is recommended that the trailer is fitted with a ring hitch which
can then be coupled to the tow hitch pin.
TB042 - 1 - 260802
01284 757500
E-mail: [email protected]
Web: www.sealey.co.uk
01284 703534
Sole UK Distributor,
Sealey Group, Bury St. Edmunds, Suffolk.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address,
including postcode.
Instructions for:
BALL & PIN TOW HITCH
Model:
TB042
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY
AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
p p WARNING! Before using the tow hitch, read, understand and apply the following:
l DO NOT exceed the specified towed and towing vehicle weights.
l Not for use on cars or car-derived vans first registered on or after 1st August 1998.
l Using ball hitch
l Using pin hitch
Maximum weight of towed vehicle 1500kg. Maximum weight of towed vehicle 3000kg.
Maximum weight of towing vehicle 3050kg.
l Never use without the towing pin and the security pin in place.
l Before each use, lightly grease the ball head and check the hitch for damage. If damage is found, rectify
before using the hitch.
l The ball hitch is designed for normal road use. If used off-road, where the angular movement between towing
and towed vehicles may be great, there is a risk of the female (socket) hitch fouling the neck of the ball and
causing damage. Therefore, for off-road use, it is recommended that the trailer is fitted with a ring hitch which
can then be coupled to the tow hitch pin.