Ee figure 4-2), Figure 4-2. re – EFJohnson 764X User Manual
Page 42
Advertising
PROGRAMMING
4-17
November 1998
Part No. 001-7600-001
4. Connect the master transceiver to the slave (target)
transceiver by plugging the cloning cable into the
microphone jack of each.
5. Turn the slave transceiver on. Then momentarily
press the POWER switch of the master transceiver
to begin the data transfer.
6. When cloning is complete, CLONE is displayed by
the master and CLONE OK by the slave.
7. To clone another transceiver, repeat this procedure
starting with step 4.
8. To return both the transceivers to normal operation,
reconnect the microphone and cycle power.
.
Figure 4-2 Memory Channel Screen (PMR Models)
Advertising
This manual is related to the following products: