Sealey AVR1500FP - Manual

INSTRUCTIONS FOR:
AIR/HYDRAULIC VEHICLE LIFT 1.5TONNE
WITH FOOT PEDAL
MODEL N
O
: AVR1500FP
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
GENERAL SAFETY.
 WARNING! Ensure Health & Safety, local authority, and
general workshop practice regulations are adhered to
when using this equipment.
 WARNING! TRAPPING DANGER – Keep hands and
fingers away from the sprockets and duplex chain.
 Keep the work area clean, uncluttered and ensure there
is adequate lighting.
 Maintain correct balance and footing. Ensure the floor is
not slippery and wear non-slip shoes.
 Remove ill-fitting clothes. Remove ties, watches, rings,
other loose jewellery. Contain and/or tie back long hair.
 Wear appropriate protective clothing.
 Familiarise yourself with the applications, limitations and
potential hazards of the vehicle lift.
 DO NOT use to achieve a task the vehicle lift was not
designed to perform.
 DO NOT allow untrained persons to use the vehicle
hydraulic lift.
PRE OPERATIONAL SAFETY.
 Ensure adequate level space around the vehicle for the
operator and the lift.
 Apply grease, if not apparent, to the carriage rollers, main
upright guides, sprockets and duplex chain to assist the
smooth action of the lifting and lowering.
 DO NOT operate the vehicle lift if parts are damaged or
missing as this may cause failure and/or personal injury.
 Before commencing lift, make a visual inspection of the
vehicle lift to ensure there is no sign of fractured welds,
bent adaptors or loose fixings. If found, do not use the unit
and refer to your local Sealey dealer for advice and
replacement parts. Tighten loose fixings.
 Before commencing lift ensure all vehicle tyres are
correctly inflated and the vehicle sills and bodywork is
structurely sound.
 Before commencing lift ensure vehicle wheels are locked,
chocked or hand braked.
OPERATIONAL SAFETY.
 DANGER! DO NOT put any limb beneath vehicle whilst
lifting or lowering. Always insert safety stop bar when
the vehicle is raised to working height. The stop bar
must take the load not the hydraulics.
 After lifting to working height insert safety stop bar and
lower load to bear on the stop as per instructions in later
sections 6.3 and 6.4.
POST OPERATIONAL SAFETY.
 When not in use, clean and store the vehicle lift in a safe,
dry, childproof location.
 Maintain the vehicle lift in good condition.
Replace or repair damaged parts. Use genuine parts only.
Unauthorised parts may be dangerous and will
invalidate the warranty.
1. SAFETY INSTRUCTIONS
3. TECHNICAL SPECIFICATION
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AVR1500FP
Maximum Load: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500kg
Maximum Lift Height: . . . . . . . . . . . . . . . . . . . . . . . . . . 995mm
Overall Height: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1315mm
Overall Width:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 705mm
Overall Length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 990mm
Locking Spacing: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80mm
Locking Positions: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110kg
2.1 Wheeled heavy-duty vehicle lift offers fast, easy lifting
and lowering, with or without an air supply. Fitted with an air/
hydraulic motor for easy operation, or, if an air line is not
available it can be operated using the integral foot pump.
Includes adaptors to lift via wheel or body. This specifically
designed vehicle lift is a perfect addition to any busy
workshop or repair centre to raise a vehicle off the floor
quickly and safely. It can be used for lifting cars, 4x4s and
vans. Vehicles can be lifted from the side, front, back or
wheels with the supplied adaptors. The lift offers significant
assistance, bringing vehicles into an ergonomic working
position. Ideal for a wide variety of applications including
welding, grinding and painting.
2. INTRODUCTION
Hook on hook off wheel
cradle adaptor shown
Original Language Version
AVR1500FP Issue: 1 - 15/04/13 © Jack Sealey Limited 2013
Fig.1