Sealey SM3002ST - Manual

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE
THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. DESCRIPTION
Floor stand with sliding tool shelf suitable for SM2502, SM2503 and SM3002.
INSTRUCTIONS FOR
MACHINE STAND
Model:
SM3002ST
2. CONTENTS AND ASSEMBLY
SM3002ST - 1 220103
2.1. Contents - Fig 1.
1. Pad 2. Foot(I)
3. Sliding shelf 4. Slide rail (left)
5. Lock washer 6. Screw (M6x16)
7. Washer 8. Nut (M6)
9. Stand top 10. Support
11. Slide rail (right) 12. Supporting bar
13. Foot (II)
2.2. Assembly
Note: Items 3, 4 , 10 and 11 are pre-assembled.
2.2.1. Lay item 9 flat on the ground with the pre-
drilled holes uppermost.
2.2.2. Position item 10 onto item 9 such that the
holes in the support (item 10) align with
the pre-drilled holes in item 9. Secure
item 10 to item 9 using the self tapping
screws provided.
2.2.3. Attach items 2 and 13 to item 10 using the
bolts, washers, lock washers and nuts
provided (items 6, 7, 5 and 8).
2.2.4. Insert item 12, ensuring the correct
orientation, as shown in fig.1. and secure
using the bolts, washers, lock washers
and nuts provided (items 6, 7, 5 and 8).
2.2.5. Attach items 1 to items 2 and 13, invert
the stand and it is ready for use.
01284 757500 [email protected] 01284 703534
Sole UK Distributor, Sealey Group, Bury St. Edmunds, Suffolk.
email
Web
www.sealey.co.uk
Fig.1.
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE
THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. DESCRIPTION
Floor stand with sliding tool shelf suitable for SM2502, SM2503 and SM3002.
INSTRUCTIONS FOR
MACHINE STAND
Model:
SM3002ST
2. CONTENTS AND ASSEMBLY
SM3002ST - 1 220103
2.1. Contents - Fig 1.
1. Pad 2. Foot(I)
3. Sliding shelf 4. Slide rail (left)
5. Lock washer 6. Screw (M6x16)
7. Washer 8. Nut (M6)
9. Stand top 10. Support
11. Slide rail (right) 12. Supporting bar
13. Foot (II)
2.2. Assembly
Note: Items 3, 4 , 10 and 11 are pre-assembled.
2.2.1. Lay item 9 flat on the ground with the pre-
drilled holes uppermost.
2.2.2. Position item 10 onto item 9 such that the
holes in the support (item 10) align with
the pre-drilled holes in item 9. Secure
item 10 to item 9 using the self tapping
screws provided.
2.2.3. Attach items 2 and 13 to item 10 using the
bolts, washers, lock washers and nuts
provided (items 6, 7, 5 and 8).
2.2.4. Insert item 12, ensuring the correct
orientation, as shown in fig.1. and secure
using the bolts, washers, lock washers
and nuts provided (items 6, 7, 5 and 8).
2.2.5. Attach items 1 to items 2 and 13, invert
the stand and it is ready for use.
01284 757500 [email protected] 01284 703534
Sole UK Distributor, Sealey Group, Bury St. Edmunds, Suffolk.
email
Web
www.sealey.co.uk
Fig.1.