Sealey STS103 - Manual

 Ensure all workshop safety rules, regulations and conditions are complied with when using this tool.
 Maintain the screwdriver in good condition.
 The screwdriver is a precision tool, DO NOT drop it or abuse it.
 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
 Keep children and unauthorised persons away from the working area.
 WARNING! DO NOT use the screwdriver if damaged or thought to be faulty.
 After use, clean and store in a safe, dry, childproof location.
1. SAFETY
2. INTRODUCTION
3. SPECIFICATION
Suitable for automotive, workshop and factory use. LCD read-out with LED, audible alarm and vibration indicating achieved and target torque
levels. Preset track, peak or desired torque levels using simple push-button menu. Clockwise and anti-clockwise operation. Selectable read-out
in Nm or lb.ft. Accurate to ±2% of stated capacity. Textured, contoured handle for added grip and comfort. Supplied with test certificate.
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . STS103
Drive: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4" Hex
Range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..0.05-5Nm
Length:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155mm
Batteries: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x AAA (supplied)
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
fig.1
Original Language Version © Jack Sealey Limited STS103 Issue: 1 01/05/14
INSTRUCTIONS FOR:
1/4” HEX DRIVE DIGITAL TORQUE
SCREWDRIVER .05-5Nm
MODEL No:
STS103