Fig.8, Operation, Maintenance – Sealey SPB57T User Manual

Page 3

Advertising
background image

5. OPERATION

Original Language Version

sPB57t Issue: 2(I) - 17/09/13

5.1.

read the safety Instructions in section 1 before operating the

spreader.

5.2.

secure the spreader onto the prime mover using the towing

pin on the hitch tube (2). secure the towing pin with the r-pin

provided. the spreader can be converted to use a ball hitch

by fitting a sealey Ø50mm towing Hitch, Model no. tB36,

available from your sealey dealer.

5.3.

Load the product into the hopper, ensuring that it is evenly

distributed and the maximum capacity of the spreader is not

exceeded. When handling hazardous products it is important

to first read the safety data sheet and take necessary safety

precautions. A full range of personal safety equipment is

available from your sealey dealer.

5.4.

the towing speed will affect the rate of flow from the

spreader. It is advisable to operate the spreader at lower

speeds for a more effective flow of the product.

5.5.

the adjustable feed system is controlled by movement of the

handle on the hitch tube (2). operate the spreader at the

desired speed and adjust the handle either forwards or

backwards until a satisfactory rate of flow is achieved. A

locking device is provided on the gauge to allow the optimum

flow required to be maintained.

5.6.

clean the spreader thoroughly after use, paying particular

attention to the area around the adjustable feed system and

the impeller.

fig.8

6. MAINTENANCE

6.1 After each use clean material out of hopper.

6.1.1 rinse/dry inside and outside of spreader after each use.

6.1.2 Before operating make sure that the tyres are inflated to the

correct pressure.

6.1.3 Periodically check all fastenings are tight.

6.1.4 Annually clean and lightly lubricate parts.

6.1.6 to avoid damaging the spreader never exceed the rated load

capacity of 57kg.

6.2 STORAGE.

6.2.1 Before storing ensure that the spreader is clean and dry.

6.2.2 store indoors or in a protected area during severe weather and

in the winter months.

6.2.3 never allow material to stay in the hopper for extended periods

of time.

© Jack sealey Ltd

Advertising
This manual is related to the following products: