Sealey APS2E User Manual
Aps2e.v2, Aluminium folding platform model no, Instructions for
InstructIons for:
aluminium Folding platForm
Model no:
apS2E.V2
thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
1. SaFEtY inStruCtionS
IMPORTANT: plEaSE rEad tHESE inStruCtionS CarEFullY. notE tHE SaFE opErational rEQuirEmEntS, WarningS & CautionS.
uSE tHE produCt CorrECtlY and WitH CarE For tHE purpoSE For WHiCH it iS intEndEd. FailurE to do So maY CauSE
damagE or pErSonal inJurY and Will inValidatE tHE WarrantY. plEaSE KEEp inStruCtionS SaFE For FuturE uSE.
2. introduCtion & SpECiFiCation
2.2
Specification
treads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Platform Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605mm
Platform size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 x 800mm
overall Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400mm
overall Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1250mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.6kg
3. aSSEmBlY & uSE
2.1
introduction: folding and portable aluminium platform with 115kg
capacity. Large, ribbed non-slip platform and treads for safe and
easy manoeuvrability. Durable aluminium alloy frame with ribbed feet
provides extra stability. safety locking catches on legs. folds flat
for easy storage and transportation. Platform size: 300 x 800mm.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
important: no liability is accepted for incorrect use of this product.
WarrantY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
inFormation: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole uK distributor, Sealey group,
Kempson Way, suffolk Business Park
,
Bury st. Edmunds, suffolk,
IP32 7Ar
www.sealey.co.uk
Web
Original Language
1.1 gEnEral SaFEtY
DANGER! Take care when using and moving platforms in the vicinity of
power cables - risk of potentially fatal electric shock.
Warning! Ensure Health and safety, local authority, and general
workshop practice regulations are adhered to when using this equipment.
Maximum weight capacity for this platform is 115kg. the weight of user
plus tools and materials should not exceed 115kg.
Always check all hinge locking mechanisms. Make sure hinges are in the
locked position before using. Inspect all parts prior to each use.
Discontinue use if any parts of the platform are missing, damaged or worn
in any way.
do not attempt to fix a damaged platform. Always have a qualified repair
person fix the damaged platform.
do not use any other attachments, components or accessories not sold
or recommended for this platform.
Always set platform up on firm, dry, stable, level ground for max. stability.
do not try to increase the height of the platform in any position by
placing anything under the platform feet.
Always use caution when getting on or off platform.
do not use the platform while under the influence of alcohol or drugs of
any kind.
do not set up the platform in front of doors that are not locked.
Always use extreme caution when using platform on a dust sheet, carpet
or other protective surface as this may prevent the
rubber feet from gripping the surface properly.
do not stand on platform whilst trying to release the locking levers.
to avoid pinching injuries, use extreme caution when folding or extending
platform sections. Keep all body parts away from hinges and moving
sections of the platform.
do not attempt to fold down the leg sections until the locking levers are
both released.
do not force the locking levers. If they should become stuck, lift that
section lightly to remove the weight from the hinge. then attempt to lift the
lever again.
do not attempt to jump, walk or move platform while on it. If you need to
move the platform get off it first. Move it, then reposition yourself.
do not attempt to push or pull anything while on the platform as this may
cause the platform to tip and you to fall.
Always stand in a well balanced position on the platform
do not to avoid losing balance and/or tipping platform, never overreach.
this platform is not a toy and is not meant for use by or near children.
never leave platform set up and unattended.
do not attempt to use the platform on stairs.
do not use the platform in windy, rainy or icy conditions as it may
become slippery as a result.
Always wear skid resistant shoes while using this platform.
do not place/use platform on a slippery surface.
When not in use store in a safe, dry, childproof area.
Keep the work area clean, uncluttered and ensure there is adequate lighting.
Always ensue both catches are engaged before use.
Warning! do not use the platform on sloping or uneven ground.
WARNING: The warnings, cautions and instructions discussed in this
instruction manual cannot cover all possible conditions and situations
that may occur. It must be understood that common sense and caution
are factors which cannot be built into this product, but must be applied
by the operator.
important: Before using the platform at work, a risk
assessment should be carried out in accordance with the
legislation in the country of use.
Warning! take particular care when opening out or folding down the
platform legs to avoid pinching injuries by keeping all body parts
(including those of other people) away from hinges and moving parts.
3.1
Before opening out the legs ensure that the two locking levers are in
the transit position (i.e. parallel with the top of the platform) as shown
above in fig.1.
3.1.1
fold both sets of legs out fully, ensuring that the stops on the two
halves of each hinge are in full, face to face contact.
3.1.2
turn the platform the right way up and rotate the locking levers (one at
each end) clockwise as shown in fig.2a. Ensure that the slot in each
locking lever is fully engaged with the locking pin on the appropriate
leg as shown in fig.2b .
3.1.3
If you have not already done so, you must read the safety
instructions before positioning and using the platform.
fig.1
fig.2a
fig.2b
APs2E.V2 Issue: 1 - 18/08/11