Sealey LFT03 User Manual

Lft03.v2, Aluminium loft ladder, Model no

Advertising
background image

InstructIons for:

aluminium lOFT ladder

Model no:

lFT03.V2

thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT: PleaSe read THeSe inSTruCTiOnS CareFullY. nOTe THe SaFe OPeraTiOnal reQuiremenTS, WarninGS & CauTiOnS.

uSe THe PrOduCT COrreCTlY and WiTH Care FOr THe PurPOSe FOr WHiCH iT iS inTended. Failure TO dO SO maY CauSe damaGe

and/Or PerSOnal inJurY and Will inValidaTe THe WarranTY. PleaSe KeeP inSTruCTiOnS SaFe FOr FuTure uSe.

1. SaFeTY inSTruCTiOnS

WarninG! the loft ladder must not be used until it has been fully

installed.

dO nOT install or use the loft ladder until you have read all of the

instructions.

Keep children and unauthorised persons away from the working

area during installation.

A separate suitable ladder is needed to access the loft during

installation.

two persons are needed to safely complete the installation, one

person working in the loft and the other on the floor below.

the side locking catches are not load bearing and the loft ladder

must not be used unless the pivot bar stops have been correctly

and fully installed.

Ensure that there is a good flat access area at the base of the

ladder to allow safe dismounting. A minimum area of one square

metre is recommended.

dO nOT use the loft ladder for any purpose other than that for

which it was designed.

dO nOT install the loft ladder if parts are missing or damaged.

check and ensure that there is enough clear internal loft space for

the ladder to be stowed before attempting installation.

In some cases it may be necessary to install additional wooden

braces or noggins to be able to fix the pivot and retaining bar in

their correct positions.

During installation ensure the work area is kept clean and free

from obstructions and is well lit.

Keep children, animals and unauthorised persons away from the

working area.

Maintain the loft ladder in good condition.

replace or repair damaged parts. use genuine parts only.

non-authorised parts may be dangerous and will invalidate the

warranty.

● Important: read and follow all of the safety information on the side

of the ladder.

dO nOT use if parts are missing or damaged.

dO nOT allow children to climb the ladder.

dO nOT use when tired, under the influence of alcohol, drugs or

intoxicating medication.

Wear non-slip footwear and if necessary clean the soles before

using the ladder.

WarninG! rest the base of the ladder on a level and solid floor.

Ensure the ladder rungs are horizontal and both ladder feet are on

the ground.

Always ensure the locking catches are fully engaged before

mounting the ladder.

Always face the ladder when ascending and descending.

only carry light materials (up to 10kg) up the ladder. never

exceed the total static load of 150kg.

WarninG! only to be used by one person at a time.

WarninG! never overeach when on the ladder.

When not in use, stow the ladder securely.

2. inTrOduCTiOn

Aluminium loft ladder manufactured to Bs 14975:2006. supplied with

hand rail and all fixing components for quick and easy installation.

three section design enables ladder to fit in smaller areas than stand-

ard two-section ladders.

3. SPeCiFiCaTiOn

4. COnTenTS

Original Language Version

Lft03.V2 Issue: 1 - 04/08/11

Model no: ............................................................Lft03

Loft opening (W x L): .............................. 432 x 508mm

Maximum Height: ....................................................3mtr

Loft clearance: ................................................ 1050mm

Maximum capacity: ............................................. 150kg

Advertising