Extech Instruments 42275 - Manual (Page 11)

V7.1 1/08 11
Unit Setting
Temperature can be
displayed in "C" or "F"
Data Logger ID
Setting
The datalogger's ID
setting allows the user to provide a unique name for each datalogger (up to 8-digits).
Sleep Mode Setting
In Sleep Mode the Datalogger turns the display off after Datalogging has been completed.
Select the Sleep Mode in software by moving the slide switch to the right for SLEEP then
click OK.
If NON-SLEEP is selected, the logger will continually display the current Temperature /
Relative Humidity. (The default is Non-Sleep)