Sealey GL59 User Manual
Parasol lamp, 16 led model no: gl59, Specification
3. SPECIFICATION
INSTRUCTION MANUAL FOR
PARASOL LAMP
16 LED
Model No: GL59
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained,
give you years of trouble free performance.
1. SAFETy INSTRuCTIONS
2. INTRODuCTION
IMPORTANT: PLEASE READ THESE INSTRuCTIONS CAREFuLLy. NOTE THE SAFE OPERATIONAL REQuIREMENTS, WARNINGS
& CAuTIONS. uSE THE PRODuCT CORRECTLy AND WITH CARE FOR THE PuRPOSE FOR WHICH IT IS INTENDED. FAILuRE TO
DO SO MAy CAuSE DAMAGE AND/OR PERSONAL INJuRy, AND WILL INVALIDATE THE WARRANTy. PLEASE KEEP
INSTRuCTIONS SAFE FOR FuTuRE uSE.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTy: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole uK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
GL69 Issue: 1 - 17/12/12
Decide on a safe height above the table and ensure it is clamped securely.
The lamp is designed to be used beneath a parasol, protected from the rain.
Store the lamp inside when not in use.
DO NOT attempt to replace the LED's.
DO NOT use the lamp for any purpose other than for which it is designed.
DO NOT use the auxilliary socket. (Not connected on this model)
Lightweight composite structure has been designed to easily fit most parasol centre support
beams, ranging from Ø30mm to Ø45mm. Spring loaded ribbed rubber grips strengthen the grip
around the centre beam. Quick release button opens lamp for easy and simple fitting. 16 LED
lights mounted at an angle to give wide spread of light for evenings outside. Powered by 3 x AA
batteries (not included)
4.1 Remove battery compartment lid situated on opposite face to lights and observe polarity, as
shown in moulding.
Insert 3 "AA" batteries (not supplied) into compartment and replace lid.
4.2 Press the release button to open the segments.
4.3 "Wrap" around the pole centrally for best grip, and snap closed.
4.4 Press on/off button to switch lights on/off. Switch off after use.
Environmental Protection. Recycle unwanted packaging materials or dispose of in a manner
which is compatible with the environment. When the product is no longer required, dispose of in
an environmentally protective way. Open battery compartment as described in Section 4.1 and
dispose of batteries according to local authority guidelines.
© Jack Sealey Limited 2012
Description:...................Specification
LED's:............................16
Type of batteries:...........3 x "AA" (not supplied)
Fitting pole size:............Ш30-Ш45mm
Operating time:..............6-8 hours
Dimensions:..................Ø200mm x 60mm
Jaws
Release button
On/off button
4. OPERATION