Operation – Sealey LED035 User Manual
Page 2
3.1. OPERATION
WARNING! Ensure that you read, and fully understand the safety instructions before use.
3.1.2. Charge the battery before use.
IMPORTANT: Ensure the light is turned ‘Off’ whilst charging. Failure to do so will damage the charger plug.
3.1.3. The penlight can be charged from either the mains adaptor or from a computer via the USB cable; the charging jack is connected into
the charging port in the base.
3.1.3. A full charge takes approximatelty 4 hours, allowing up to 4 hours of use.
3.1.4. Whilst charging, a red LED shows in the SMD display; a green LED shows when charged.
3.1.5. As this light is fitted with a lithium-ion battery, it can be charged at any time; there is no ‘memory’ effect with this type of battery.
3.1.6 . The first press of the switch (fig.1) illuminates the CREE LED in the end, the second press lights the SMD’s arranged on the front of the
unit.
WARNING: Ensure that the penlight is pointing away from you before operating the switch.
3. OPERATION
Original Language Version
LED035 Issue: 1 - 22/03/13
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing
batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme.
Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
© Jack Sealey Limited
Environmental Protection.
Recycle unwanted materials instead of disposing of
them as waste. All tools, accessories and packaging should be sorted, taken to a recycle centre and
disposed of in a manner which is compatible with the environment.
Battery Removal.
The battery may be removed by loosening the six small cross-headed screws in the casing and splitting along the centre seam.
WEEE Regulations.
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment.
When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling
information.