Energy saving tips, What to do if, Correcting malfunctions – Electrolux 1050-4 GS User Manual

Page 18

Advertising
background image

18

Energy Saving Tips

• Do not install the appliance near cookers, radiators or other sources

of warmth. High ambient temperatures cause longer, more frequent
operation of the compressor.

• Ensure sufficient air circulation and exhaust at the appliance base

and at the back wall of the appliance. Never cover air vent
openings.

• Do not place warm foods into the appliance. Allow warm foods to

cool first.

• Only leave door open as long as necessary.
• Do not set temperature any colder than necessary.
• Check the storage temperature in the freezer on the thermometer.
• Put frozen food in the fridge to defrost. The cold in the frozen food

will then be used to cool the fridge.

• Keep the heat emitting condenser, the metal grille on the rear wall

of your appliance, always clean.

What to do if ...

Correcting Malfunctions

Spare parts:
The following spare parts can be ordered from your local AEG Service
Force Centre. You can fit these yourself without any special skill or
training, e.g.:
– freezer drawers,
– door handle

A malfunction may be caused by only a minor fault that you can retify
yourself using the following instructions.

Advertising