Model ir20.v2, Fig.1, Introduction & specifications 3. assembly – Sealey IR20 User Manual

Page 2

Advertising
background image

Model

IR20.v2

Heat output

20.5kW

rating

70,000Btu/hr

fuel

Paraffin / Kerosene / Diesel

running time Per filling

7hrs (max)

fuel tank capacity

15litres

Heated Area

14000ft³ / 396m³

Voltage/Hz

230V / 50Hz

rated Amps

5A

net Weight

14Kg

Infrared heater suitable for well ventilated indoor applications. clean burning unit operates on paraffin, kerosene or diesel.

unit produces an impressive 70,000Btu/hr. 15ltr fuel tank allows a max of 7hrs running time, making this unit extremely economical. complies

with rigorous standards and is fitted with a safety cut-out.

DO NOT switch the heater off by disconnecting it from the mains. ALWAYS set the switch on the burner to the ‘off’ position and allow

the cooling cycle to finish, before disconnecting from the mains.

DO NOT use an external fuel tank. only use the tank that is fitted to the heater, and only fill it when the heater has cooled down.

ensure that the heater is correctly turned off

When not in use for an extended period, store in a safe, dry area, out of reach of children.

NOTE: this appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack

of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person

responsible for their safety.

children should be supervised to ensure that they do not play with the appliance.

2. INTRODUCTION & SPECIFICATIONS

3. ASSEMBLY

unpack the heater and check contents. should there be any damaged or

missing parts contact your sealey dealer immediately.
3.1. Attach handle by lining up the holes in the handle with the holes in the

upper shell of the heater (fig.1).

3.2. Insert screws and tighten.
3.3. remove heater and packaging material from the carton.
Note! Retain the box and packaging material for future storage.

Fig.1

Original Language Version

Ir20.V2 Issue: 5 - 19/04/12

WARNING! This heater is not suitable for use with Bio-Diesel; use

of Bio-Diesel will damage the filter and seals.

Damage caused by use of Bio-Diesel will not be covered

by warranty.

Advertising