Sealey HVF20S - Manual (Page 2)

Model no. .........................................hvf20s ............................hvf24s
Fan diameter ..............................550mm (20") .................... 610mm (24")
speeds ......................................................... 3 ....................................... 2
speed range ........................1,150-1,350rpm ..................1300-1400rpm
maximum Airflow ........120mtr³/min (4300cfm) .....210mtr³/min (7400cfm)
motor Power ...................................100-170W .........................190-250W
supply.....................................................230V .................................230V
current..................................................... 0.5A .................................. 1.1A
 Warning! ensure that you read, understand and apply safety instructions
in section 1 before using fan.
3.1. check that the speed control is set to “0” (off) and then plug into the mains power
supply and switch the power on.
3.2. the fan features 2 speeds (HVF24s) or 3 speeds (HVF20s) which are selectable
using the switch located at the back of the fan above the motor.
3.3. Adjust the direction of the air flow by rotating and tilting
the fan up or down as required.
3.4. When you have finished using the fan ensure you turn the speed control switch
to "0” (off) and disconnect the fan from the mains power.
3.5. Wall Mounting (hvf20s only)
3.5.1 HVF20s can be wall mounted using the supplied fixing kit.
3.5.2 the fan hangs from the base support (5) on the parts diagram, using the three
hanging brackets.
3.5.3 select the appropriate fixing from those supplied, and space the three hanging
brackets equally along the base support. Hang the fan and fit the set screws
through the brackets to secure the fan.

Warning! ensure that the fan is disconnected from the mains power supply
before attempting any of the following:
4.1. use a soft, damp cloth to clean the fan.
do not immerse the fan in water and never allow water to drip onto the motor
housing. do not use solvents, petroleum, paint thinner or other chemicals to clean
the fan.
4.2. to clean the fan blade, undo the cross headed screws around the circumference,
remove the grille and clean the blade with a slightly damp cloth.
replace the grille as required and refit the cross headed screws.
4.3. should the motor, switch or the power lead require service or maintenance contact
your local service agent.
4.4. When not in use place the fan in its original box or otherwise cover to protect
from dust, and store in a safe, dry, childproof location.
3. oPeration
4. care of fan
2. introduction & sPecification
High velocity fans suitable for movement of huge volumes of air.
robust unit with heavy duty gauge steel casing, guard and frame.
Featuring a 360° tilt function allowing for the direction of air flow to
be positioned anywhere on a 360° axis. carefully balanced and
fully guarded blades provide quiet and safe operation. Fitted with
Bs fully approved plug. suitable for use in industrial, commercial,
agricultural, automotive workshop and showroom applications.
hvf24s
hvf20s
HVF 20s & 24s Issue: 3 (l) - 21/03/14
environmental Protection.
recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
Weee regulations.
dispose of this product at the end of its working life in compliance
with the eu directive on Waste electrical and electronic equipment.
When the product is no longer required, it must be disposed of in an
environmentally protective way. contact your local solid waste
authority for recycling information.
Parts support is available for this product. to obtain a listing and/or diagram, please log on to: www.sealey.co.uk,
email: [email protected] or phone: 01284 757500
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
iMPortant: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
inforMation: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534 [email protected]
sole uK distributor, sealey group,
Kempson Way, suffolk Business Park ,
Bury st. edmunds, suffolk,
IP32 7Ar
www.sealey.co.uk
Original Language Version © Jack sealey limited