Sealey SFF04 - Manual (Page 2)

4. CARE OF FAN
3. OPERATION
IMPORTANT: Turn the fan OFF and disconnect from power supply before cleaning.
4.1. Use only a soft, damp cloth to clean the fan.
4.2. DO NOT immmerse the fan in water and NEVER allow water to drip into the motor housing.
4.3. DO NOT use solvents or other chemicals to clean the fan.
4.4. To clean the fan blades, remove front guard by removing the 2 screws situated on the reverse side of the fan guard.
4.6. Wipe the blades and guards clean then reassemble front guard.
4.7. When not in use, place the fan in its original box or otherwise cover to protect from dust and store in a safe, dry childproof location
Manufactured from durable composite marerial, ergonomically designed to pivot on a 180° axis, maximising the volume and
direction of air flow. Features 1 speed setting to keep a constant air flow around the room. Fitted with BS fully approved plug.
2. INTRODUCTION & SPECIFICATIONS
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534 [email protected]
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park ,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
email
Original Language Version
SFF04 Issue: 1 - 15/01/13 © Jack Sealey Limited
Model No: ....................................................SFF04
Fan ø: ............................................. 100mm(4")
Speeds: ................................................................ 1
Power: ............................................................. 14W
Supply: ........................................................... 230V
Height: ........................................................150mm
SFF04
3.1. Ensure that fan switch is in the 'off ' position before connecting to mains.
3.2. Route the flex from the mains plug to the machine so as not to present a trip hazard.
Environmental Protection.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
WEEE Regulations.
Dispose of this product at the end of its working life in compliance
with the EU Directive on Waste Electrical and Electronic Equipment.
When the product is no longer required, it must be disposed of in an
environmentally protective way. Contact your local solid waste
authority for recycling information.
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to:
www.sealey.co.uk, email: [email protected] or phone:01284 757500.