Sealey DRP15 - Manual

InstructIons for:
AdjustAble height rAmp for bArrel
bunds
(wIth curb attachments)
model:
drp15.V2
thank you for purchasing a sealey product. manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
DrP15.V2 Issue no: 1 - 20/06/08
1. sAfetY instruCtions
IMPORTANT: pleAse reAd these instruCtions CArefullY. note the sAfe operAtionAl reQuirements, WArnings And
CAutions. use the produCt CorreCtlY And With CAre for the purpose for WhiCh it is intended. fAilure to do so mAY
CAuse dAmAge And/or personAl injurY And Will inVAlidAte the WArrAntY. pleAse Keep instruCtions sAfe for future use.
2. introduCtion And speCifiCAtion
 only use the ramp on firm, level, unobstructed surfaces which are capable of
supporting the ramp and barrel or sack truck etc.
 when wheeling a sack truck or barrel up onto a barrel bund or curb pull the sack truck
up the ramp so that the load would fall away from you if an accident occurred.
 regularly check that the ramp is safe to use, making sure all nuts and bolts are tightened.
 replace or repair damaged parts. Use only recommended parts. Unauthorised parts
may be dangerous and will invalidate the warranty.

do not use on tarmacadam, the ramp could sink and become unsafe to use.

do not overload.

do not use the ramp for any purpose other than that for which it is designed.
 WArning! failure to comply with these instructions may result in loss of load,
damage to ramp or other property and/or personal injury.
 WArning! the use and changing the legs will require assistance. this is a heavy
product and so you will also need assistance when moving it.
2.1 adjustable ramp enables easy drum handling over curbs and onto barrel bunds.
made from heavy-duty steel with tread plate to help prevent slipping whilst
moving drum. height adjustment allows ramp to fit barrel bunds from 275 to
345mm high. adjustable curb attachment allows easy access up and down curbs
from 90 to 140mm high.
2.2 specification
model no . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DrP15.V2
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .965mm
ramp width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .750mm
overall width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .830mm
bund height. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275 - 345mm
curb height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 - 140mm
3. Contents
1
2
3
4
5 6
7
1. ramp support bracket
2. ramp Platform
3. ramp support bar (only for use with the barrel bund legs)
4. small nuts (for support bar)
5. small Legs - curb
6. Large Legs - barrel bund
7. Large bolts (to attach legs)