Initial setup, Power sources, Charging the battery pack – Eton FR405 User Manual

Page 6: Aa battery operation

Advertising
background image

American Red Cross FR405

OWNER’S MANUAL

INITIAL SETUP

1. Open the compartment; it slides downward with firm pressure

at center of hinge.

2. Connect the battery pack.

POWER SOURCES

1. Rechargeable battery pack (included).
2. 3 AA batteries (not included).
3. AC adapter/charger (included).
4. Continually turning the crank, even with no batteries installed.

CHARGING THE BATTERY PACK

1. Switch the BATTERY/DYNAMO-ADAPTER/OFF switch to the

OFF position.

2. Turn the dynamo-crank clockwise or counter-clockwise about

2 turns per second for 90 seconds.

3. After charging, select the DYNAMO-ADAPTOR position for

power.

While charging, the red LED charging light illuminates.

AA BATTERY OPERATION

1. Open the battery compartment.
2. Install 3 AA batteries, observing polarity diagram.
3. For power, set the power selector switch to the

BATTERY position.

6

Advertising