Fig.8, Trouble shooting, Fig.7 fig.9 – Sealey SAC2203BLN User Manual

Page 4

Advertising
background image

fig.8

5.6 RECOMMENDED OILS

synthetic oil suitable for temperatures ranging from -5°c to 45°c:

viscosity 5W50. We do not recommend using mineral oil in this

compressors.

Part No. Qty

Description

fso1

1ltr x 12

compressor oil fully synthetic

fso1s

1ltr x 1

compressor oil fully synthetic

fso5

5ltr x 1

compressor oil fully synthetic

5.7 IMPORTANT WARNING - Air contaminants taken into the

compressor will affect optimum performance.

example: Body filler dust or paint over-spray will clog the pump

intake filter and may cause internal damage to pump/motor

components. Please note that any parts damaged by any type of

contamination will not be covered by warranty.

6. TROUBLE SHOOTING

Fault

Cause

Remedy

Pressure drop in

the tank.

Air leaks at

connections.

run compressor to max.

pressure, switch off.

Brush soap solution over

connections and look for

bubbles. tighten connections

showing leaks. If problem

persists contact Authorised

service Agent.

Pressure switch

valve leaks when

compressor is

idle.

non-return valve seal

defective.

discharge all tank pressure.

referring to fig.9, unscrew

valve cap 'A'. clean rubber

disc 'B' and its seat. refit all

parts accurately.

compressor stops

and does not

restart.

Power failure.

Motor failure.

check electricity supply and

fuse.

contact Authorised service

Agent.

compressor does

not stop at max

pressure.

Pressure switch fault.

contact Authorised service

Agent.

compressor does

not reach max

pressure.

filter clogged.

Head gasket or valve

fault.

replace filter element.

contact Authorised service

Agent.

compressor noisy

with metallic

knock.

low oil level.

Bearing or piston

damage.

turn off and top up oil

immediately.

contact Authorised service

Agent.

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: no liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

01284 703534

[email protected]

Sole UK Distributor, Sealey Group,

Kempson Way, suffolk Business Park

,

Bury st. edmunds, suffolk,

IP32 7Ar

www.sealey.co.uk

Web

email

fig.7

fig.9

Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk,

email [email protected] or phone 01284 757500.

Original Language Version

sAc2203Bln.V2 Issue: 1 - 07/11/13

Jack sealey limited

Environmental Protection.

recycle unwanted materials instead of disposing of them as

waste. All tools, accessories and packaging should be sorted,

taken to a recycle centre and disposed of in a manner which

is compatible with the environment.

WEEE Regulations.

dispose of this product at the end of its working life in compliance

with the eu directive on Waste electrical and electronic equipment.

When the product is no longer required, it must be disposed of in an

environmentally protective way. contact your local solid waste

authority for recycling information.

Advertising