Sealey LSH180V - Manual (Page 2)

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTy: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INfORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534 [email protected]
Sole uK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park ,
Bury St. Edmunds, Suffolk,
iP32 7Ar
www.sealey.co.uk
W e b
email
Original Language Version
lSH180V issue:1 - 18/04/13 © Jack Sealey limited
3.1. find a suitable large log or tree stump, sit the log on a hard, stable surface.
NOTE: the splitter uses high impact force to split the log do not use on any surface that can be damaged.
Assemble the log splitter (refer to fig.1).
3.2. Drill a hole approximately 20mm in diameter and 75mm depth, in the top of the log for the bottom of the log splitter shaft to fit in.
3.3. Place the bottom of the log splitter shaft in the hole, position the blade on the log to be split at the required point.
3.4. Grasp the handle of the impact weight and lift it to 20cm from the top of the shaft.
3.5. force the weight down quickly to hit the cylindrical top of the blade to split the log. it may be necessary to do this more than once.
3.6. Keep your body clear of the pieces of falling log.
3. OPERATION
Environmental Protection.
recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
Parts support is available for this product. to obtain a listing and/or diagram, please log on to: www.sealey.co.uk,
email: [email protected] or phone: 01284 757500