Sealey PT1000 - Manual

Page 1
InstructIons for: TROLLEY PLAIN
MoDEL no: PT500.V2, PT1000.V2,
PT2000.V2, PT3000.V2
thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND
CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY
CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
2. GENERAL 1. CONTENTS
section 2. General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
section 2.1 Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
section 2.2. technical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
section 3. safety / operational Instructions. . . . . . . . . . . . . . . . . .2.
section 4. Maintenance / Examination / Inspection. . . . . . . . . . . .2.
section 5. Assembly and storage. . . . . . . . . . . . . . . . . . . . . . . . . .3.
section 6. owner’s & operator’s responsibilities. . . . . . . . . . . . .3.
section 7. Declaration of conformity. . . . . . . . . . . . . . . . . . . . . . .4.
section 8. Parts List/Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.
Page No.
2.1 Identification
supplier: sealey Power Products,
Kempson Way,
suffolk Business Park,
Bury st Edmunds,
suffolk, IP32 7Ar.
Model no: PT500.V2, PT1000.V2, PT2000.V2,
PT3000.V2
2.2 Technical Data
Rated Capacity
a) Design capability: test Load 50% overload.
b) for applications see section 3.
c) for information on parts and materials requiring specialised
repair techniques see section 4.
d) Ambient operating temperature between -10°c and +50°c.
Original Language Version
Pt500.V2, Pt1000.V2, Pt2000.V2, Pt3000.V2 Issue: 1 - 15/04/10
Model Weight
Minimum
Standard
I-Beam
Dimensions
(D X W X Web):
Maximum
Distance
Between Spans:
Maximum Standard
I-Beam
Dimensions
(D X W X Web):
Maximum
Distance
Between Spans:
PT500.V2 7kg 125 x 75 x 5.5mm 3000mm 250 x 125 x 7.5mm 8000mm
PT1000.V2 13kg 125 x 75 x 5.5mm 2500mm 250 x 125 x 7.5mm 6000mm
PT2000.V2 20kg 180 x 100 x 6.0mm 3000mm 350 x 150 x 9.0mm 9000mm
PT3000.V2 31kg 200 x 100 x 7.0mm 2700mm 850 x 150 x 9.0mm 4500mm
Model Capacity Test Load
Min/Max.
I Beam
Width
Min. Curve
Radius
A B C D E
PT500.V2 500kg 750kg 64-140mm 800mm 212mm 115mm 115mm 90mm 115mm
PT1000.V2 1000kg 1500kg 64-140mm 1000mm 255mm 127.5mm 127.5mm 104mm 128mm
PT2000.V2 2000kg 3000kg 76-165mm 1300mm 305mm 150mm 150mm 130mm 152mm
PT3000.V2 3000kg 4500kg 76-203mm 1500mm 344mm 172mm 172mm 145mm 186mm
SEE TABLE BELOW