Dg01, Declaration of incorporation – Sealey DG01 User Manual

Page 2

Advertising
background image

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including your postcode.

Sole UK Distributor,

Sealey Group,

Bury St. Edmunds, Suffolk.

01284 757500

[email protected]

www.sealey.co.uk

01284 703534

Web

e-mail

4.1

Lift the drum grab with two hands at points D & E (See fig.3) and lay it flat across the maximum diameter of the drum (See fig.4).

4.2

Attach a hoist or crane to the lifting point on the grab and start to lift slowly. As the lifting point rises the grab will start to close. Just
before it locks onto the drum, stop lifting and check that the grab is still aligned across the diameter of the drum and that the ridge on
each curved lifting plate is underneath the top rim of the drum. (See fig.5)

4.3

When satisfied that the grab is correctly positioned continue to lift until the drum leaves the ground.

4.4

If the drum is to be transported (See fig.6) do this with the drum in the lowest position. The drum should only be transported over flat
level surfaces.

4.5

When lowering the drum ensure that the surface on to which it is lowered is flat and smooth and free from obstructions.

4.6

When removing the grab from the lifting hook keep hands and fingers away from the hinged centre area of the grab.

Fig.4

Fig.5

Fig.6

5.1.

Occasionally lubricate the central hinge.

5.

STORAGE AND MAINTENANCE

4.

OPERATION

DECLARATION OF INCORPORATION

DRUM GRAB 350KG CAPACITY

This equipment must not be used with any crane or
hoist which does not comply with directive 98/37/EC

For Jack Sealey Ltd. Sole importer
into the UK of Sealey Power Products.

Signed by Mark Sweetman

1st August 2006

NAME & DATE

SIGNATURE

COMPANY

PRODUCT DESCRIPTION

MODEL NO.

DG01

DG01 - 1 - 01/08/06

Advertising