Sealey DG03 User Manual
Fig.1 fig.2, Maintenance, Operation
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly
maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.
USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
Ensure that the drum grab is in good working order. Take action for
immediate repair. The use of unauthorised parts may be dangerous and
will invalidate the warranty.
Operate the drum grab in a suitable, well lit work area.
Keep work area clean and tidy and free from unrelated materials.
Ensure all non-essential persons keep a safe distance whilst lifting.
DO NOT use to lift personnel.
DO NOT carry loads over personnel.
DO NOT leave suspended loads unattended.
DO NOT use the drum grab if damaged.
DO NOT allow untrained persons to operate the drum grab.
DO NOT exceed the rated capacity of the drum grab.
When not in use, store in a safe, dry, childproof area.
✓
Before lifting the load ensure that the drum grab hooks are
engaging with the rim and that there are no obstacles which
may snag the load whilst it is being lifted.
✓
To avoid injury, be fully aware of your own and other persons locations in
relation to the lifting, and lowering, of the load.
✗
DO NOT use with other attachments.
✗
DO NOT allow the load to swing during lifting/transporting.
✗
DO NOT allow the load to drop suddenly. Lower load with care, ensuring
that you are fully aware of the condition of the surface onto which the load
is to be placed.
✗
DO NOT use this product to perform a task for which it is not designed.
✗
DO NOT use whilst under the influence of drugs, alcohol or
intoxicating medication.
WARNING! Failure to heed safety and warning instructions may result
in damage and/or personal injury and will invalidate the warranty.
2. INTRODUCTION & SPECIFICATION
3. ASSEMBLY INSTRUCTIONS/PARTS
1. SAFETY INSTRUCTIONS
2.1. DG03 Manufactured from heavy-duty steel. Features 3 gripping hooks to
provide maximum security and control when lifting. Suitable for lifting
205ltr vertical plastic and steel drums. Compatible for use with an
overhead hoist.
DG04 Manufactured from heavy-duty steel with welded gripping hooks.
Suitable for lifting 205ltr vertical steel drums with an overhead hoist.
Hooks fit under the lip of the drum to provide a secure and stable lift.
2.2. Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DG03
Maximum Capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360kg
Drum Size: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205litre
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5kg
2.3. Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DG04
Maximum Capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500kg
Drum Size: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205litre
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5kg
DG03,DG04 Issue No.1 - 29/10/13
3.1. Check contents from lists. In the unlikely event of missing or damaged
parts consult your Sealey dealer immediately.
3.1.1 If supplied separately, only the pivot pin will require fitting on Model DG03,
retained by a washer and a split pin.
3.1.2 On Model DG04 the pivot screw is retained by a hex nut and a split pin.
DO NOT over tighten.
Original Language Version
© Jack Sealey Limited
INSTRUCTIONS FOR:
DRUM GRAB 3-LEG/360kg & 2-LEG/500kg
CAPACITY.
MODEL Nos:
DG03 & DG04
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
W e b
Environmental Protection.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be
sorted, taken to a recycle centre and disposed of in a manner
which is compatible with the environment.
fig.1 Parts DG03
Item Description
1
Drum Grab
2
Pivot Pin
3
ø20 Plain Washer
4
ø3 x 30 Split Pin
5. MAINTENANCE
5.1. Inspect items after each use for integrity, missing parts and damage.
5.2. Clean with moist cloth, allow to dry and store indoors.
5.3. Lubricate pin joints.
4. OPERATION
4.1. With the drum grabs hooked up to the crane.
4.1.1 Transport over to and above the centre of the drum.
4.1.2 Lower the jaws to the approximate height, just below the rim.
4.1.3 Slowly elevate the crane observing the gripping hooks engagement with
the rim of the drum. Adjustment may be required.
4.1.4
Raise the drum to a minimal height for transporting. Elevate fully, only
when the loading point is reached. Hooks disengage automatically once
the load is set down, but will require intervention to clear.
fig.1
fig.2
fig.2 Parts DG04
Item Description
1
Jaw with Lifting Eye
2
Jaw
3
Hex Screw M16 X 30
4
Hex Nut M16
5
ø2 X 25 Split Pin
2,3,4
1
2
1
3,4,5