Sealey DG02 - Manual (Page 2)

3.3 to release drum from the drum clamp.
3.3.1. lower drum onto ground (fig.4) and continue to lower the forks slowly so clamp jaws slide down the sides of the drum.
3.3.2. As the clamp jaws reach the first lip around drum (fig.5), they will begin to lift and as they do this they will also start to widen.
continue to slowly lower forks and as the clamp jaws widen more, also slowly reverse the forklift truck and the drum will be
released from the drum clamp (fig.6).
fig.4 fig.5 fig.6
4.1. store in a safe place with the jaw mechanism folded back onto the main frame so as not to cause an obstruction.
4.2. occasionally lubricate the hinges.
4. storage and Maintenance
DECLARATION OF INCORPORATION
ForkliFt drUM claMp (single 205ltr)
this equipment must not be used with any fork lift
truck which does not comply with directive 98/37/ec
For Jack sealey ltd. sole importer
into the Uk of sealey power products.
signed by Mark sweetman
21st august 2009
NAME & DATE
SIGNATURE
COMPANY
PRODUCT DESCRIPTION
MODEL NO.
DG02.V2
01284 757500
01284 703534 [email protected]
sole Uk distributor
sealey group,
Bury st. edmunds, suffolk.
www.sealey.co.uk
Web
email
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
iMportant: no liability is accepted for incorrect use of this product.
WarrantY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
inForMation: for a copy of our catalogue and latest promotions call us on 01284 757525 and leave your full name, address anpostcode.
dG02.V2 Issue no.1 21/08/09