Sealey CST979 User Manual
Sack truck, Cst979, Fig.1
Model No. . . . . . . . . . . . . . . . . CST979
Max. Load. . . . . . . . . . . . . . . . . . .120kg
Wheel Diameter . . . . . . . . . . . . 250mm
Wheel Thickness . . . . . . . . . . . . 90mm
Height . . . . . . . . . . . . . . . . . . .1170mm
Overall Width . . . . . . . . . . . . . . 465mm
Platform Depth . . . . . . . . . . . . . 200mm
CST983.V2-01 Wheel
CST983.V2-02 Wheel Fixings
CST983.V2-03 Handle Grip
CST986.V2-01 Pneumatic Wheel
CST986.V2-02 Wheel Fixings
CST986.V2-03 Handle Grip
CST987.V2-01 Pneumatic Wheel
CST987.V2-02 Wheel Fixings
CST987.V2-03 Handle Grip
CST988.V2-01 Pneumatic Wheel
CST988.V2-02 Wheel Fixings
CST988.V2-03 Handle Grip
CST994.V2-01 Pneumatic Wheel
CST994.V2-02 Wheel Fixings
CST994.V2-03 Handle Grip
1. SAFETY INSTRUCTIONS
2. SPECIFICATION
3. ASSEMBLY
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE
AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
Fig.1
Always load evenly with the centre of gravity of the load as near the centre and rear of the plate as possible.
Obtain additional support for large or wide loads to prevent tipping.
DO NOT overload the truck - see Specification.
DO NOT leave unattended, especially when loaded, unless the wheels are chocked or the truck is otherwise secured.
DO NOT use truck on uneven ground and do not run over curbs or steps - use a ramp.
DO NOT allow others to ride on the truck.
DO NOT use the truck if any part is damaged, paying particular attention to the wheels.
Lightweight aluminium construction, weighs only 6kg with a carrying capacity of 120kg. Fitted with Ø250mm
pneumatic wheels for easy movement over rough terrain. Features composite grip handles for added comfort
and stability.
InSTruCTIOnS FOr:
SACK TRUCK
MODEL no:
CST979
3.1
Wheels. Ensure axle is clean from dust and dirt to allow free movement of the wheel.
3.2
Slide the wheel (Fig.1.2) onto the axle, followed by the washer (Fig.1.3), complete by pushing the dome
cap (Fig.1.4) over the axle, a soft mallet may be need to seat the cap correctly.
3.4
repeat for the other side.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7Ar
www.sealey.co.uk
Web
Original Language Version
CST979 Issue: 1 - 08/07/10