Electrolux MCC4060E - Manual (Page 41)

39
Installation
INSTALLING THE APPLIANCE
1. Remove all packaging and check carefully for any
signs of damage.
2. If the microwave is fitted in position C, ensure that
the minimum air gaps are maintained as shown in
the diagram.
3. Secure four cupboard retention blocks in position
using the setting template (TMAPTA004URR0).
4. Fit the appliance into the kitchen cupboard, lift over
the bottom/front blocks then push slowly, and
without force, until the front frame of the oven
seals against the front opening of the cupboard.
5. Ensure the appliance is stable and not leaning.
6. Fix the oven in position with the screws provided.
The fixing points are located within the louvre areas
at the top and bottom of the oven (see diagram,
item 1, on page 4).
7. Fit the frame fastner caps to the four fixing
positions (2 spare caps are provided).
8. It is important to ensure that the installation of this
product conforms to the instructions in this
operation manual and the conventional oven or hob
manufacturer’s installation instructions.
D
Position A
Position C
Position B
Conventional
oven
The microwave can be fitted in position A, B or C:
POSITION NICHE SIZE CHIMNEY Gap Between
W D H (min) Cupboard & Ceiling
A 560 x 550 x 450 20 50
B 560 x 550 x 450 20 50
C 560 x 550 x 460 20 Not Applicable
Measurements in (mm)
Chimney
Cable clip
65 mm 5 mm
460 mm
20 mm
min. 20 mm
450 mm
Conventional
oven
Position A
Position C
min. 20 mm
450 mm
Position B
Chimney
Cable clip
1. MCC4060-UK ENGLISH 05/05/2006 14:46 Page 39