Sealey AP6350GS User Manual

Page 2

Advertising
background image

4.4 decide the shelf positions for the upper section of the shelves

and assemble two more end frames, each using 2 leg angle

sections and 3 short shelf supports ensuring that the shelf

supports are at the same height on both frames. the upper half

can be joined to the lower half by using the lower shelf supports

as shown in fig.3. If the lower shelf is not positioned at the

centre of the frame use the special joining pieces supplied as

shown in fig.4.

4.5 When both upper end frames are in place join them together

with the remaining 6 long shelf supports ensuring that they are

at the same height as the short shelf supports.

4.6 See Fig.5. When the frame is complete attach the plastic floor

protectors to the bottoms of the angle sections. Get a second

person to steady the frame while this is done.

4.7 See Fig.6. move the frame into position in the chosen area.

Place the 5 mdf shelves onto the shelf supports.

4.8 See Fig.7. to assemble as a bench/low level shelving unit make

up two separate frames following steps 4.1 to 4.3 but with

different shelving positions. make up one frame with 3 shelves

and one frame with two shelves as shown below. Ensure that the

middle and top shelves on both frames are at the same height.

fix the frames together with the four nuts and bolts supplied.

Place the 5 mdf shelves into position in the frames.

4.9 See Fig.8. to assemble as a corner unit make up two separate

frames following steps 4.1 to 4.3 but with different shelving

positions. make up one frame with 3 shelves and one frame with

two shelves as shown below. Ensure that the middle and top

shelves on both frames are at the same height. fix the frames

together with the four nuts and bolts supplied. Place the 5 mdf

shelves into position in the frames.

fig.3

fig.6

fig.4

fig.5

fig.7

fig.8

AP6350Gs Issue no:1 06/08/12

NOTE:

It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: no liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

INFORMATION: for a copy of our catalogue and latest promotions call us on 01284 757525 and leave your full name, address and postcode.

Original Language Version

© Jack sealey Limited

Advertising