Sealey SKS02 - Manual

2. INTRODUCTION
4. OpeRaTION
3. INsTallaTION
1. safeTy
Heavy-duty steel construction with twin locking bolts. Powder
coated finish to help prevent corrosion. Compact design,
pre-drilled holes and security fixings allow safe to be fixed to the
floor and/or to the wall and hidden away discreetly. Model
numbers SKS02 and SKS04 include a single shelf to help utilize
the area inside the safe. Supplied with two keys.
4.1. Appoint key holders for the two keys provided and discuss
security arrangements for the safekeeping and availability of the
keys.
4.2. To open safe, insert key into lock. If it will not go in, try the key
the other way up. Turn the key clockwise and open the door.
Place items for safe keeping into the safe. Fully close the door
and turn the key anti-clockwise to lock. Remove key and keep
safe until required again.
4.3. Should you lose your keys we can supply replacements. To order
these please contact our sales office on 01284 757500 and
quote the unique serial number relating to your safe, this can be
found on the front of this manual. We will also require a copy of
your purchase invoice for the safe to confirm that you are the
owner. Please note that replacement keys are special order only
(we do not carry these in stock for security reasons) and as such
they can take 14 – 28 days to arrive.
3.1. Careful consideration should be given to the sighting of the safe
to ensure that it is discreetly placed and not easily found by any
intruders.
3.2. Each safe is supplied with four anchor bolts suitable for fixing to
brick and concrete.
3.3. Fixing to hollow partition walls is not recommended. If fixed to
wood it must be to a solid wooden structure.
3.4. Open the door of the safe and with the help of a second person,
position it where required and mark the mounting positions
through the pre-drilled holes in either the back or the base of the
safe.
3.5. Drill four 10mm holes to a depth of 38mm and insert the four
anchor bolts with nuts and washers removed. (fig.1.A&B)
3.6. Position the safe over the four protruding mounting studs and
support it there whilst placing a washer, split washer and nut
onto each stud. (fig.1.C)
3.7. Continue to support the safe whilst tightening the fixings using a
10mm spanner. (fig.1.D)
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMpORTaNT: No liability is accepted for incorrect use of this product.
WaRRaNTy: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INfORMaTION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534 [email protected]
sole UK Distributor, sealey Group,
Kempson Way, Suffolk Business Park ,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
email
Original Language Version SKS01, SKS02, SKS04 Issue: 2 - 31/10/11
INSTRuCTIONS FOR:
Key lOCK seCURITy safes
MODEL Nos:
sKs01, sKs02, sKs04
sKs01 sKs02 sKs04
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly
maintained, give you years of trouble free performance.
IMPORTANT: please ReaD THese INsTRUCTIONs CaRefUlly. NOTe THe safe OpeRaTIONal ReQUIReMeNTs, WaRNINGs aND CaUTIONs.
Use THIs pRODUCT CORReCTly aND ONly fOR ITs INTeNDeD pURpOse. faIlURe TO DO sO May CaUse DaMaGe aND/OR peRsONal INJURy
aND WIll INValIDaTe THe WaRRaNTy. ReTaIN THese INsTRUCTIONs fOR fUTURe Use.
 WaRNING! These safes are heavy and care should be
exercised in transit and handling to ensure that no one is injured.
 WaRNING! The sKs04 is a 2 man lift both for transit and
installation.
 For maximum security, these safes must be securely fixed to a
floor and/or wall. At all times, these safes should be positioned on
a level floor/surface.
 DO NOT install in areas where damp and condensation are
present.
fig.1
W350 x D250 x H250 W380 x D300 x H300 W350 x D330 x H500
serial No.