Sealey SCR14 - Manual

INSTRUCTIONS FOR:
WORKSHOP STOOL
MODEL No:
SCR14
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give
you years of trouble-free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND
CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY
CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE
USE.
3. ASSEMBLY
1. SAFETY INSTRUCTIONS
1.1 GENERAL SAFETY
 WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations
are adhered to when using this stool.
 Locate stool in a suitable working area.
 WARNING! Use stool on level and solid ground, preferably concrete.
 Keep the stool clean and tidy in accordance with good workshop practice.
 DO NOT use the stool for any purpose other than that for which it is designed.
 DO NOT stand on the stool.
 DO NOT use the stool outdoors.
 DO NOT get the stool wet or use in damp or wet locations or areas where there is condensation.
 DO NOT clean the stool with any solvents which may damage the plated surface or the protective
coating on the padded seat base.
2. SPECIFICATIONS & CONTENTS
Four legged heavy-duty steel construction with a
polished Chrome plate finish for anti-corrosion
resistance. Two strengthening rings for stability, lower
one also acts as a foot rest. Features pneumatic
height adjustment, Ø350mm padded swivel seat and
padded back rest for comfort and ease when turning
to and from point of work.
Specifications:
Height: . . . . 730 - 860mm
Capacity:. . . . . . . . .136kg
Weight: . . . . . . . . . . . .5kg
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534 [email protected]
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park ,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
email
Original Language Version SCR14 Issue: 1 - 05/04/11
3.1 Take the four legs and slot them into the central hub, encase the legs into the hub with the
hub plate (fig.2B) and use four hex head bolts and nuts to secure. See fig.2A / fig.2B.
3.2 Attach the upper ring with four phillips bolts and nuts. See fig.2C.
3.3 Attach the lower footrest ring with four phillips bolts and nuts, ensure the ring is attached on
the inside of the frame. See fig.2D.
3.4 Slide the pre-drilled end of the seat frames into the hole in the seat base. Secure with the
hand screws . See fig.2E.
3.5 Slide the backrest over the other end of the seat frame until the spring loaded tabs are seated
and a 'click' is heard. See fig.2F.
3.6 Insert the larger end of the pneumatic cylinder into the centre hub, it is an interference fit so
ensure it is pushed in with reasonable force. See fig.2G.
3.7 Take the seat assembly and push it onto the pneumatic cylinder.
fig.2
Ref.. .Description . . . . . . . . . . Quantity
A . . . .Backrest . . . . . . . . . . . . . . . . . . . 1
B . . . .Seat . . . . . . . . . . . . . . . . . . . . . . 1
C. . . .Pneumatic piston . . . . . . . . . . . . 1
D. . . .Hub. . . . . . . . . . . . . . . . . . . . . . . 1
E . . . .Hub Plate . . . . . . . . . . . . . . . . . . 1
F . . . .Leg . . . . . . . . . . . . . . . . . . . . . . . 4
G. . . .Seat Frame . . . . . . . . . . . . . . . . 2
H. . . .Upper Ring . . . . . . . . . . . . . . . . . 1
I . . . .Footrest Ring . . . . . . . . . . . . . . . 1
J . . . .Bolt and nut (Phillips head) . . . . 8
K . . . .Bolt and nut (Hex head). . . . . . . 4
L . . . .Hand Screw . . . . . . . . . . . . . . . . 2
fig.2
fig.1