Sealey AP2030BB - Manual

INSTRUCTIONS FOR:
HEAVY-DUTY WORKBENCH WITH 5 DRAWERS
BALL BEARING RUNNERS
MODEL
: AP2030BB
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
1. SAFETY INSTRUCTIONS
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
2. CONTENTS AND SPECIFICATION
1.1 GENERAL SAFETY
! WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are
adhered to when using this bench.
" Locate bench in a suitable working area.
" Keep the work area clean, uncluttered and ensure there is adequate lighting.
! WARNING! Use bench on level and solid ground, preferably concrete. Avoid
tarmacadam since the bench may sink into the surface.
" Keep the bench clean and tidy in accordance with good workshop practice.
" Keep children and unauthorised persons away from the working area.
# DO NOT use the bench for any purpose other than that for which it is designed.
# DO NOT exceed maximum capacity of workbench.
# DO NOT undertake work on the bench without the workpiece being adequately
secured. Use clamps or a vice (not included) to secure the workpiece. Available from
your Sealey dealer.
# DO NOT use the bench out of doors.
# DO NOT get the bench wet or use in damp or wet locations or areas where there is
condensation.
# DO NOT clean the bench with any solvents which may damage the paint surface or the
protective coating on the wooden top.
! The maximum load for each drawer is 25kg, full load for the workbench is 250kg.
AP2030BB - 1 - 260407
2.1 Powder coated steel panels with 40mm wood laminate top. Five drawers. Open shelving for storage of larger items. Supplied flat
packed.
2.2 Table Size (W x D): 1372 x 508mm
Working Height: 865mm
Capacity: 250kg
2.3 Carefully unpack the product and check the contents against the diagram below. Should any items be missing or damaged make
immediate contact with your Sealey dealer.
A . . . .SIDE PANEL H . . . .RIGHT SIDE PANEL M . . . . .DRAWER R . . . . .RIGHT SlDE RUNNER
C . . . .BOTTOM RAIL I . . . . .SUPPORT PANEL O . . . . .CORNER BRACE S . . . . .SCREW (M5x12)
D . . . .TOP RAIL J . . . . .BACK PANEL P . . . . .WOODEN TOP T . . . . .ADJUSTABLE LEG LEVELLER
E . . . .CENTRE SUPPORT K . . . .SHELF Q. . . . .LEFT SIDE RUNNER U . . . . .HEX HEAD SCREW 5/8"
G . . . .LEFT SIDE PANEL