Assembly instructions – Sealey AP20BP User Manual
Page 2
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park
,
Bury st. Edmunds, suffolk,
IP32 7Ar
www.sealey.co.uk
Web
Original Language Version
AP20BP Issue: 1 - 19/02/10
4. ASSEMBLY INSTRUCTIONS
4.1
offer up one of the angle brackets to the rear corner of the bench (fig.1) .
4.2
Mark the position of the mounting holes and remove the bracket.
4.3.
Using a suitable pilot drill, prepare the holes you marked in the work top to accept the three self tapping screws.
4.4
offer the angle bracket back up to the work top, align the holes you prepared and the bracket holes; screw in the
three self tapping screws (fig.1).
4.5
repeat this procedure on the other rear corner of the work top.
4.6
With the corner brackets securely fastened to the work top, offer up the back panel.
4.7
Align the back panel threaded mounting points with the holes on the corner bracket and fasten with the screws (fig.2).
4.8
check that all the fixings and the panel are secure.
fig.2
3 x panel screws
3 x self tapping screws
fig.1