Sealey CX309 User Manual
Sealey Equipment
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly
maintained, give you years of trouble free performance.
1. SAFETY INSTRUCTIONS
3. TECHNICAL SPECIFICATIONS
2. dESCRIPTION
1.1.
GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice
regulations are adhered to when using this trolley.
dO NOT overload the trolley - see 2. DESCRIPTION.
dO NOT drop loads on to shelves.
dO NOT place hot (above 100°C) items on to shelves.
Load shelves with the heaviest items on the lower shelves.
Use the trolley in a suitable work area.
Keep the work area clean, uncluttered and ensure there is adequate lighting.
Keep the trolley clean and tidy in accordance with good workshop practice.
dO NOT use the trolley
for any purpose other than that for which it is designed.
dO NOT stand on the trolley, use it as a ladder or allow others to ride on the trolley.
Use the wheel locks to prevent the trolley from inadvertently moving.
dO NOT leave unattended, especially when loaded, unless the wheels are locked, chocked
or the trolley otherwise secured.
dO NOT use trolley on uneven ground and dO NOT run over curbs or steps - use a ramp.
dO NOT use trolley if any part is significantly damaged, paying particular attention to the wheels.
Keep children and unauthorised persons away from the work area.
Carefully unpack the product and check the contents against the diagram and parts list below. Should any items be missing or damaged contact your
Sealey dealer.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
INSTRUCTIONS FOR:
3-LEVEL COMPOSITE WORKSHOP TROLLEY
MODEL NO
. Cx309
Composite garage, workshop, or janitorial trolley with each shelf having a capacity of 40kg. Three shelves with shallow edge retaining walls on three
sides and flush on one side for ease of adding or removing items. Two ergonomic and aesthetically styled operator handles. Four low friction Ø100mm
swivel castors, two free and two locking.
5. ASSEMBLY
Overall size:......................................750 x 460 x 980mm
Shelf size:...................................................625 x 420mm
Shelf capacity:..................................................40kg/level
Description
Description
Description
Description
Quantity
Quantity
Quantity
Quantity
Shelf (top
and middle)
Bottom shelf
(for castors)
Corner post
Handle
Castor
Castor (locking)
Spanner for castor
Washer for castor
Washer for handle
Screw for handle
Rubber mallet
5.1.1)
5.1.3)
5.1.2)
5.1
Assemble on a bench protecting against scratches,
following sequence in fig1.
5.1.1
Fit four corner posts to middle and bottom shelf.
5.1.2 Fit two handles to top shelf with supplied screws.
5.1.3 Fit all three shelves to corner posts.
5.1.4 Fix 4 castors and tighten with provided spanner.
Orientation Note! Shelves have one flush edge and
three retaining edges. The flush edge is the loading
edge.
4. CONTENTS
fig1.
integral
captive nut
5.1.4)
plain washer
spring washer
Original Language Version
CX309 Issue: 1 - 01/10/12
© Jack Sealey Limited
Flush edges
ImpOrTaNT: REAd THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS ANd CAUTIONS.
USE THIS TROLLEY CORRECTLY ANd WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENdEd. FAILURE TO dO SO MAY CAUSE
dAMAGE OR PERSONAL INjURY ANd WILL INVALIdATE THE WARRANTY. RETAIN THESE INSTRUCTIONS FOR FUTURE USE.