Sealey AP22DFC - Manual

INSTRUCTIONS FOR:
2 DRAWER MOBILE CABINET
MODEL No:
AP22DFC
1. SAFETY INSTRUCTIONS
2. INTRODUCTION
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS &
CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO
SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS
SAFE FOR FUTURE USE.
AP22DFC Issue: 1 - 29/09/08
Use as part of a complete professional garage storage system or an
individual storage unit. Featuring two silver-grey roller bearing drawers, two
doors, two fixed and two locking castor wheels. Added security provided by
cylinder lock and supplied with two keys. All steel construction with a graphite
powder coat finish and moulded composite bumpers for light damage
protection.
Overall Size: (W x D x H) 710 x 360 x 838mm
Medium Drawer x2: 560 x 322 x 100mm
3. ASSEMBLY
3.1 CONTENTS INSPECTION
Unpack all the parts and layout on the packing material. Visually inspect all panels to check for transportation damage.
3.2 INSTALL THE CORNER BUMPERS (Fig.1).
3.2.1 Position the bumpers over the corner holes.
3.2.2 Insert the brass cup washers and hex screws into the bumper holes and tighten with the hex key provided. DO NOT overtighten screws.
Fig.1
1.1 GENERAL SAFETY
 WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this cabinet.
 WARNING! Use caution when handling and assembling the metal components. The metal may have sharp edges or corners, the use of
protective gloves is recommended.

Keep the work area clean, uncluttered and ensure there is adequate lighting.
 Keep the cabinet clean and tidy in accordance with good workshop practice.
 Keep children and unauthorised persons away from the working area.
 Keep the cabinet on a level surface. It may become unstable if stored or moved
on a sloping surface and may cause personal injury, and/or damage to the cabinet.

Always close the drawers and lock the cupboard before moving the cabinet.
 Always apply the brakes once the cabinet has been moved to the work area.
 DO NOT open more than one drawer at a time.
 DO NOT climb, step or stand on the cabinet or in the drawers.
 DO NOT use the cabinet for any purpose other than that for which it is designed.
 DO NOT exceed the maximum weight for each drawer 22.5kg (50lbs).
 DO NOT use in damp work areas.
 WARNING! The warnings, cautions and instructions referred to in this instruction
manual cannot cover all possible conditions and situations that may occur. It must
be understood that common sense and caution are factors which cannot be built
into this product, but must be applied by the operator.