Sealey APPC07 User Manual
Pit cart 7-drawer heavy duty, Appc07, Instructions for
INSTRUCTIONS FOR:
PIT CART 7-DRAWER HEAVY DUTY
MODEL No
:
APPC07
1.1. GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using these units.
Locate the units in a suitable work area.
Keep the work area clean, uncluttered and ensure there is adequate lighting.
WARNING! Use the Rollcab on level and solid ground, preferably concrete.
Keep the units clean and tidy in accordance with good workshop practice.
Keep children and unauthorised persons away from the work area.
DO NOT use these units for any purpose other than that for which they are designed.
DO NOT place the units in a damp or wet location or an area where there is condensation.
DO NOT clean the units with any solvents which may damage the surfaces or the protective coating.
DO NOT move the units with the drawers out. To avoid tipping, open one drawer at a time and close and secure all drawers whilst
moving.
DO NOT step on the drawers.
Multi purpose heavy duty pit cart ideal for use in workshops, garages, job sites, race pits and more where tools and equipment are required
away from base. Oversized dimensions make for ultimate ruggedness with 435 x 180mm pneumatic tyres, hydraulic disc braking/parking system
and handle bar steering. Two large side lockers with 5 position adjustable shelf but equally suited to accomodating a compressor, welder,
Roadstart or other larger items. Seven Heavy Duty ball bearing slide drawers, designed to accomodate our modular tool trays. A stainless steel
worktop completes the ruggedness. All drawers and both side lockers can be locked with the turn of a single key (supplied with two identical
keys).
Original Language Version
© Jack Sealey Limited
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
1. SAFETY
2. INTRODUCTION
3. SPECIFICATION
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . APPC07
Overall Size (W x D x H): . . . . . . 1850 x 774 x 1224mm
Medium Drawer Size: (x4):. . . . . . . . 533 x 398 x 60mm
Large Drawer Size (x2): . . . . . . . . . 533 x 398 x 130mm
Xtra-Large Drawer (x1): . . . . . . . . . 533 x 398 x 205mm
Locker Size (x2):. . . . . . . . . . . . . . . 380 x 580 x 605mm
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250kg
4. ASSEMBLY
APPC07 Issue: 1 - 11/08/14
4.1.
Fit handle assembly to front of cart with four bolts and spring washers. (See fig.1).
4.2.
Use clips along length of handle shaft to attach hydraulic brake pipe. Ensure that it is not stretched when handle is moved up and down.