Maintenance 5. operation – Sealey AP2200BB User Manual
Page 2
01284 757500
01284 703534
www.sealey.co.uk
Web
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our catalogue and latest promotions call us on 01284 757525 and leave your full name, address and postcode.
4.3.
Turn the rollcab upside down and place the base into position as shown in fig.3A.
Note: Place protective material onto the ground to avoid damaging the top of the rollcab.
4.4.
Position the corner brackets (fig.3B) and secure using bolts, washers and nuts.
4.5.
Attach the back panel to the base using two bolts, washers and nuts.
4.6.
Ensure the base is square in the rollcab and tighten all nuts fully (fig.3C).
4.7.
Place the rollcab upright and place the topchest on top as shown in fig.4.
6. MAINTENANCE
5. OPERATION
6.1.
Periodically lubricate the drawer slides (fig.5).
6.2.
Clean the surfaces with a soft cloth and a mild water/detergent solution.
6.3.
Check all fixings and tighten if required.
5.1.
To lock the top chest, close all drawers, then insert one lock bar into the back slot inside the top compartment. Close the lid and lock with the
key.
Parts support is available for this product. To obtain parts email [email protected] or phone 01284 757500.
fig.3
fig.4
fig.5
AP2200BB.V2
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business
Park
, Bury St. Edmunds, Suffolk,
IP32 7AR
AP2200BB.V2 Issue No.2(SP)- 28/08/14
Original Language Version
© Jack Sealey Limited