Sealey GSS1515G User Manual
Page 17
8.6.4. If required, the door can be assembled on the opposite side. Align the door with the edge and drill
new holes. Remove the pin from the hinge and reverse it before assembling the door. Fill the old
pre-drilled holes with rivets if required. Perform the same procedure for the pad lock.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, dispose of the product according to local regulations.
Original Language Version
GSS1515G Issue: 1 - 26/09/14
© Jack Sealey Limited