Everpure MRS Reverse Osmosis System MRS-100 - Manual (Page 2)

MRS Reverse Osmosis System
Overall Dimensions:
30”H (34”-CC Model) x 15”W (20.5” with
Prefilter) x 8“D
Inlet and outlet connection:
3/8" OD tube connection
Wastewater line connection:
1/4" OD tube connection
Service Flow Rate:
Dependant on water pressure in storage
tankand line size(s) to equipment
Pressure Requirements:
Operating:
25 - 80 psi (172-552 kPa), non-shock
Maximum Static:
100 psi (689 kPa), non-shock
Electrical connection required:
115 Volts AC, 60 Hertz, 1 Phase
Water Supply:
0.7 gpm (2.7l) min.
Inlet Temperature:
40°F - 100°F (4-38°C)
Inlet TDS:
1,500 ppm max recommended
Operating Weight:
35 lbs. (not including storage tanks)
The contaminants or other substances
removed or reduced by this system are not
necessarily in your water. Do not use with
water that is microbiologically unsafe or of
unknown quality without adequate
disinfection before or after the system.
Configurable system that delivers reverse osmosis or
Everpure
1040 Muirfield Drive
Hanover Park, IL 60133
MRS 100/100CC/225/225CC system (excluding replaceable
elements) is covered by a limited warranty against defects in
material and workmanship for a period of one year after the date of
purchase.
Everpure replaceable elements (filter cartridges and water treatment
cartridges) are covered by a limited warranty against defects in
material and workmanship for a period of one year after date of
purchase. See printed warranty for details. Everpure will provide a
copy of the warranty upon request.