Sealey TM102 - Manual (Page 3)

3. SPECIFICATION
Function Range Resolution Accuracy
AC Voltage: (Auto-ranging except 200mV)
Input Impedance: 10MΩ
Frequency Range:50 to 60Hz
Maximum Input: 600V dc or 600V ac rms (CATIII)
Maximum Input: 1000V dc or 1000V ac rms (CATII)
200.0mV 0.1mV ±1.5% reading ± 30 digits
2.000V 1mV ±1.2% reading ± 3 digits
20.00V 10mV ±1.5% reading ± 3 digits
200.0V 100mV ±1.5% reading ± 3 digits
600V 1V ±2.0% reading ± 4 digits
1000V 1V ±2.0% reading ± 8 digits
Function Range Resolution Accuracy
DC Voltage: (Auto-ranging)
Input Impedance: 10MΩ
Maximum Input: 600V dc or 600V ac rms (CATIII)
Maximum Input: 1000V dc or 1000V ac rms (CATII)
200.0mV 0.1mV ±0.5% reading ± 2 digits
2.000V 1mV
±1.2% reading ± 2 digits 20.00V 10mV
200.0V 100mV
600V 1V ±1.5% reading ± 2 digits
1000V 1V ±1.5% reading ± 4 digits
Function Range Resolution Accuracy
DC Current: (Auto-ranging for uA / mA)
Overload Protection: 0.2A / 250V and 10A / 250V
Fuse.
Maximum Input: 200mA dc or 200mA ac rms on uA /
mA ranges, 10A dc or ac rms on 10A range.
200.0µA 0.1µA ±1.0% reading ± 3 digits
2000µA 1µA
±1.5% reading ± 3 digits 20.00mA 10µA
200.0mA 100µA
10A 10mA ±2.5% reading ± 5 digits
Function Range Resolution Accuracy
AC Current (Auto-ranging for uA / mA)
Overload Protection: 0.2A / 250V and 10A / 250V
Fuse.
Frequency Range: 50 to 60Hz
Maximum Input: 200mA dc or 200mA ac rms on uA /
mA ranges, 10A dc or ac rms on 10A range.
200.0µA 0.1µA ±1.5% reading ± 5 digits
2000µA 1µA
±1.8% reading ± 5 digits 20.00mA 10µA
200.0mA 100µA
10A 10mA ±3.0% reading ± 7 digits
Function Range Resolution Accuracy
Resistance (Auto-ranging)
Input Protection: 500V dc or 500V ac rms.
200.0Ω 0.1Ω ±1.2% reading ± 4 digits
2.000KΩ 1Ω ±1.0% reading ± 2 digits
20.00KΩ 10Ω
±1.2% reading ± 2 digits 200.0KΩ 100Ω
2000MΩ 1KΩ
20.00MΩ 10KΩ ±2.0% reading ± 3 digits
Function Test Current
Audible Continuity Test
Audible threshold: Less than100Ω
Overload protection: 500V dc or ac rms.
0.3mA typical
NOTE!Accuracy specifications consist of two elements:
1. (% reading) – This is the accuracy of the measurement circuit.
2. (± digits) – This is the accuracy of the analog to digital converter.
NOTE! Accuracy is stated at 65°F to 83°F (18°C to 28°C) and less than 70% RH (Relative Humidity).
TM102 Issue No: 2(I)- 19/06/14
Original Language Version © Jack Sealey Limited