Epson 1240U Photo - Manual (Page 21)

1
Setting up the Scanner 1-9
R4C5940
Rev. C
A5 size SETUP.FM
3/30/01 Pass 3
R Proof Sign-off:
KOW K.Tsukagoshi J.Miyakoshi
M.Fujimori
NOC Lee
6. Make sure the carriage moves slightly and the fluorescent
lamp on the carriage turns on.
7. The indicator light stays on in green, meaning the scanner has
completed initialization.
8. Unplug the scanner.
If the scanner does not work as described, make sure the power
cord is firmly plugged in, and then try again.
Note:
❏ The scanner turns off the fluorescent lamp if it does not receive any
commands from the computer within 15 minutes.
❏ Be sure to unplug the scanner once you have finished using it.
c
Caution:
Whenever you unplug the scanner, wait at least 10 seconds before
plugging it back in. Rapidly plugging and unplugging the
scanner can damage the scanner.
carriage
(in the home position)