Livarno Z30652..-BS - Manual (Page 10)

10 GB/IE
J Never touch the mains plug 3 with damp or wet hands.
J Dispose of the lamp if the glass shade 5 is broken or cracked.
Q
Bringing into use
j Insert the lamp’s mains plug 3 into an ordinary mains outlet socket
(230 V~).
j Use the ON / OFF switch / dimmer 4 to switch the lamp on or off.
Note: Set the desired brightness by turning the ON / OFF switch /
dimmer 4 clockwise (brighter) or anticlockwise (darker).
j Bend the flexible lamp arm 1 into the desired position using the
lamp pin 2 .
Note: Do not turn the flexible lamp arm 1 completely about itself
or the mains lead inside the lamp could be damaged.
Q
Maintenance and Cleaning
Note: The device requires no maintenance. The LED cannot be replaced.
WARNING! DANGER OF ELECTRIC SHOCK! For electrical
safety reasons do not clean the lamp with water or other liquids
and never immerse it in water.
J Do not use solvents such as petrol and the like, as they could
damage the lamp.
j Unplug the lamp from the mains socket and let it cool down at
least 10 minutes.
j Use a dry, fluff-free cloth for cleaning.
89227_IE_Content.indd 10 2/6/2013 4:02:14 PM