Epson 50-764 - Manual (Page 15)

15-English
LOCKING POWER OUT FOR 50-765
THE POWER SWITCH FOR THE 50-765
CAN NOT BE LOCKED IN THE OFF POSITION AND
SHOULD BE LOCKED OUT AT THE POWER SOURCE
TO PREVENT UNAUTHORIZED USE.
TROUBLESHOOTING GUIDE
For assistance with your tool, visit our website at www.deltamachinery.com for a list of service centers or call the
DELTA Machniery help line at 1-800-223-7278 (In Canada call 1-800-463-3582).
WHEN USING THIS DUST COLLECTOR, DO NOT PICK UP ANYTHING THAT IS BURNING,
SMOLDERING OR SMOKING, SUCH AS MATCHES, CIGARETTES, OR HOT ASHES.
DO NOT USE TO VACUUM COMBUSTIBLE EXPLOSIVE MATERIALS, SUCH AS COAL, GRAIN
OR OTHER FINELY DIVIDED COMBUSTIBLE MATERIAL.
DO NOT USE TO VACUUM HAZARDOUS, TOXIC, OR CARCINOGENIC MATERIALS SUCH AS
ASBESTOS, PESTICIDE OR LEAD-BASED PAINT DEBRIS.
LOCKING SWITCH IN “OFF”
POSITION FOR 50-764
IMPORTANT: When the machine is not in use, the “ON”
button (A) Fig. 17 should be locked
to prevent unauthor-
ized use, using a padlock (C) Fig. 18 with a 3/16" diam-
eter shackle through the hole beside the button.
Fig. 18
C
MAINTENANCE
REPLACEMENT PARTS
Use only identical replacement parts. For a parts list or to
order parts, visit our website at servicenet.deltamachinery.
com.
You can also order parts from your nearest factory-
owned branch, or by calling our Customer Care Center at
1-800-223-7278 to receive personalized support from highly-
trained technicians.
SERVICE AND REPAIRS
All quality tools will eventually require servicing and/or
replacement of parts. For information about Delta Machinery,
its factory-owned branches, or an Authorized Warranty
KEEP MACHINE CLEAN
Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp
cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.
Wear certified safety equipment for eye, hearing and respiratory protection while using compressed air.
FAILURE TO START
Should your machine fail to start, check to make sure the prongs on the cord plug are making good contact in the
outlet. Also, check for blown fuses or open circuit breakers in the line.
SERVICE
Service Center, visit our website at www.deltamachinery.
com or call our Customer Care Center at 1-800-223-7278.
All repairs made by our service centers are fully guaranteed
against defective material and workmanship. We cannot
guarantee repairs made or attempted by others.
You can also write to us for information at Delta Machinery,
4825 Highway 45 North, Jackson, Tennessee 38305 -
Attention: Product Service. Be sure to include all of the
information shown on the nameplate of your tool (model
number, type, serial number, etc.)