Livarno LLL 90 A2 - Manual (Page 11)

Magnifier Lamp LLL 90 A2
English - 9
Using the magnifying lens

Open the cover of the lamp shade by pulling on the lug (6).

Look through the magnifying glass from above to obtain an enlarged view of small objects
beneath the lamp shade. To focus on what you are looking at, move the object closer to or
further away from the magnifying glass.

If you no longer need to use the magnifying glass, close the cover again.
Maintenance / Cleaning
Servicing
The light source of the magnifier lamp consists of long-life LEDs. The LEDs can not be replaced and do not
require any servicing.
Any damaged power cord must be replaced by the manufacturer or authorised customer service. If the
power cable or the housing of the magnifier lamp become damaged, the lamp may no longer be used.
If the power cord is damaged you run the risk of an electric shock.
Cleaning
Allow the magnifier lamp to cool down completely before cleaning it.
Make sure that no liquid gets into the housing. Otherwise there is the risk of electric shock.
To clean the magnifier lamp and its lens use a dry cloth. Never use any solvents or cleaners that may
damage the plastic housing. If the product is very dirty, use a slightly moistened cloth.