Safety / bringing into use, Bringing into use – Livarno Z31303C-BS/Z31303D-BS User Manual

Page 7

Advertising
background image

7

GB

Safety / Bringing into use

mains you should always check the
device and the mains lead for any
damage. A damaged device repre-
sents the danger of death from
electric shock.

J

Do not use the device if you find any
damage.

J

Please consult a specialist electrician
if you discover any damage or prob-
lems with the device, or for the per-
formance of repairs to the device.

J

Never open any of the electrical
equipment or insert any objects into
it. Such interventions represent the
danger of death from electric shock.

J

It is essential that the device does
not come into contact with water or
other liquids.

J

Protect the power supply cable

4

from sharp edges, mechanical strain
and hot surfaces.

J

Never use the device in the immedi-
ate vicinity of a bathtub, shower or
swimming pool.

J

Do not look directly into the light or
its reflection. Do not aim the light di-
rectly at people. This could produce
glare, leading to accidents.

J

If direct or reflected light strikes your
eyes, close them and move your
head immediately out of the light.

J

Operate the lamp only with supplied

mains adapter (LPS03-120-0100-2W).
Please note that any damage caused
through the use of a different adapt-
er is excluded from the warranty.

J

Never touch the mains adapter

6

with moist or wet hands.

J

If the lamp is not to be used for an
extended period, e.g. while you
are away on holiday, then the mains
adapter

6

must be pulled out of

the mains socket.

J

The bulb becomes hot during oper-
ation. Allow the lamp and bulb to
cool before you touch them.

J

The LEDs cannot be replaced.

Q

Bringing into use

j

Never direct the LED light beam on
to reflective surfaces or at people
or animals. Failure to observe this
advice may result in eye injury and /
or loss of sight to people or animals.
Even a weak LED light beam can
cause eye damage.

j

Place the lamp down with its base

2

supported on a flat and horizontal
surface.

j

Connect the mains connector

5

to

the mains adapter

6

.

94316_C-D_LED-Tischleuchte_Content_PL_HU_SI_CZ_SK.indd 7

23.07.13 13:26

Advertising