Livarno Z31708A/Z31708B/ Z31708C/Z31708D - Manual (Page 9)

9 GB/MT
LED Ceiling Light
Intended use
This light is suitable only for use in dry rooms. The
light is not intended to be used for commercial pur-
poses.
Parts description
1 Dowel
2 Mains power lead (external)
3 Fabric tube
4 Lamp housing
5 Terminal block
6 Screw
7 Protective cap
8 Spotlight
Technical Data
Operating voltage: 230 V ~ 50 Hz
Light bulb: 20 SMD-LED‘s per spotlight
(LEDs not replaceable)
Rated output: max. 11.5 W
Protection category:
Model number: Z31708A (triangle, chrome-
plated), Z31708B
(triangle, titanium-coloured),
Z31708C (rail, chrome-
plated), Z31708D (rail,
titanium-coloured)
Scope of delivery
1 LED Ceiling Light
2 Screws
2 Dowels ø 6 mm
2 Protective caps
2 Fabric tubes
1 Installation instructions
Safety information
PLEASE READ THE ASSEMBLY INSTRUCTIONS
BEFORE USE! PLEASE KEEP THE ASSEMBLY
INSTRUCTIONS IN A SAFE PLACE!
This appliance may be used by chil-
dren age 8 years and up, as well as
by persons with reduced physical,
sensory or mental capacities, or lacking experi-
ence and/or knowledge, so long as they are
supervised or instructed in the safe use of the
appliance and understand the associated risks.
Children should not be allowed to play with
the appliance. Cleaning and user maintenance
should not be performed by children without
supervision.
This lamp is suitable only for use
indoors.
0.5 m
FIRE HAZARD! Fit the light so that
it is at least 0.5 m away from the
material illuminated. Fire can result
from the development of too much heat.
Danger to life by
electric shock
Always check lamp for damage before con-
necting it to power. Never use the light if it
shows any signs of damage.
Before assembly, ensure that the available
mains voltage corresponds to the operating
voltage necessary for the light (230V ∼).
Do not connect the lamp if this is not the case.
Mount the light so that it is protected from
spray water and moisture.
CAUTION! DANGER OF BURN
INJURIES! To prevent burns, verify
the light is switched off and has
cooled down for at least 5 min before touching
it. Lamps can become very hot.
90546_liv_LED-Deckenleuchten_Content_ES_IT.indd 9 19.09.13 10:26